answersLogoWhite

0

You need to replace the "O" ring inside the lid of the feeder.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Chemistry

Why should you not put water on a chlorine leak?

Putting water on a chlorine leak can exacerbate the situation by creating more toxic chlorine gas. It can also cause the chlorine to spread further, increasing the risk of harm to people nearby. It's best to evacuate the area and call emergency services for proper handling of a chlorine leak.


How you can detect and small leak of gasesous chlorine in and around a chlorinator?

To detect a small leak of gaseous chlorine, you can use a chlorine gas detector, which will alert you to any presence of chlorine gas in the air. Additionally, you can look for physical signs such as a greenish-yellow cloud or a distinct chlorine odor. It is important to act quickly if you suspect a leak, as chlorine gas can be harmful in high concentrations.


If the leak continues, how many kilograms of chlorine (Cl) will be emitted into the atmosphere each year?

To calculate the amount of chlorine emitted into the atmosphere each year, you need to know the rate of the leak in kilograms per year. Once you have that information, you can multiply the rate of the leak by the molar mass of chlorine (35.45 g/mol) to find the amount of chlorine emitted annually.


How do you detect chlorine leaks around a chlorinator?

To detect chlorine leaks around a chlorinator, you can use a chlorine leak detector that is specifically designed to detect chlorine gas. These detectors typically monitor the air for chlorine levels and can alert you if there is a leak. It's important to regularly inspect the equipment and conduct maintenance to ensure there are no leaks.


How do you decrease chlorine ppm in swimming pools?

To decrease chlorine levels in a swimming pool, you can either dilute the water by adding fresh water or use a pool water conditioner/dechlorinator. Testing the water regularly and adjusting the chlorine levels as needed will help maintain a healthy balance in the pool. You can also temporarily shut off the chlorine feeder to allow levels to drop naturally over time.

Related Questions

How do you open the out-flow valve on a Hayward chlorine feeder?

Depends on the model. Just rotate the small valve to the right???


Why would water be shooting out of brass nut at bottom of Hayward CL200 chlorine feeder?

Bad gasket? Replace the o-rings at the unions etc.


Why should you not put water on a chlorine leak?

Putting water on a chlorine leak can exacerbate the situation by creating more toxic chlorine gas. It can also cause the chlorine to spread further, increasing the risk of harm to people nearby. It's best to evacuate the area and call emergency services for proper handling of a chlorine leak.


How you can detect and small leak of gasesous chlorine in and around a chlorinator?

To detect a small leak of gaseous chlorine, you can use a chlorine gas detector, which will alert you to any presence of chlorine gas in the air. Additionally, you can look for physical signs such as a greenish-yellow cloud or a distinct chlorine odor. It is important to act quickly if you suspect a leak, as chlorine gas can be harmful in high concentrations.


How do you add tablets to inline pool feeder?

Usually unscrew the top of the feeder then insert the tabs. Be careful of high concentrations of chlorine gas when you open the lid.


If the leak continues, how many kilograms of chlorine (Cl) will be emitted into the atmosphere each year?

To calculate the amount of chlorine emitted into the atmosphere each year, you need to know the rate of the leak in kilograms per year. Once you have that information, you can multiply the rate of the leak by the molar mass of chlorine (35.45 g/mol) to find the amount of chlorine emitted annually.


How do you detect chlorine leaks around a chlorinator?

To detect chlorine leaks around a chlorinator, you can use a chlorine leak detector that is specifically designed to detect chlorine gas. These detectors typically monitor the air for chlorine levels and can alert you if there is a leak. It's important to regularly inspect the equipment and conduct maintenance to ensure there are no leaks.


What makes a boiler lose water pressure?

A leak on the return or supply lines and the automatic feeder is not working


How do you release pressure in order to take the cover off the cl-200 hayward chlorine feeder?

Simply release the pressure on your system at the top of the filter or at your waste valve if you have one (hose bibb at the discharge side of the pump if one is installed). Make sure your system is turned off. Think about adding a salt sanitizing system and get rid of that old fashion chlorinator.


Is chlorine tablets or liquid or crystals the same?

NO. Liquid chlorine does not have stablizer. It is good for shock. I spend a fortune using liquid twice weekly only to see it vanish in the sun. Tablets are best, especially in a feeder.


What do you do if your chlorine level is too high?

If your chlorine level is too high, you can reduce it by diluting the pool water with fresh water. Another way is to turn off the chlorine feeder and allow the chlorine to naturally diminish over time. Additionally, you can use a chlorine neutralizer to bring down the chlorine levels quickly.


Will the salt in a salt water pool with a chlorine generator cause metal pipes to erode and eventually leak?

NO