Because the smaller the cylinder the more accurate the measurement.
The largest volume a graduated cylinder can typically measure is around 2,000 milliliters or 2 liters. Some specialized graduated cylinders may have larger capacities, but this is the general range for most laboratory-grade cylinders.
after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added" after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added"
Depends on the weight of the glass. The water weighs 10 grams if filled to the 10 ml mark - more if overfilled, of course.
To prepare 100ml of 0.5N HCl solution from a stock solution of 5.0N HCl, you need to dilute the stock solution with water. To calculate the volume of stock solution needed, you can use the formula C1V1 = C2V2, where C1 is the concentration of the stock solution, V1 is the volume of the stock solution needed, C2 is the desired concentration, and V2 is the final volume of the diluted solution. So, V1 = (C2 * V2) / C1 = (0.5 * 100) / 5 = 10ml of the stock solution. Dilute this 10ml of stock solution to 100ml with water.
To prepare Altman's acid fuchsin, dissolve 0.5g of basic fuchsin in 100mL of absolute ethanol. Then add 100mL of distilled water and 10mL of 1N hydrochloric acid. The solution should be filtered before use to remove any precipitates.
No, the uncertainty of a graduated cylinder is typically based on its smallest graduated division. Therefore, the 100 ml graduated cylinder would have a larger uncertainty compared to the 10 ml graduated cylinder.
Technically, as long as both are 'accurate,' both are acceptable. However, we don't live in an ideal world. In a 10mL graduated cylinder, the height difference between 1mL is visible, where in a 1L (1000mL) graduated cylinder, 1mL of difference isn't quite visible.
You need to buy a desk that will fit in a very small space. Before you shop, would you use a measurement tool just estimate the space? Explain.How could you use a 100-ml graduated cylinder to measure 100mL?What two tools are used to measure length? When would you use each one?
A graduated cylinder is just a tall cylinder with a little spout that tips out, and has markings in 1-10mL spans.
Using a 10 ML graduated cylinder you can read 2 decimal places. This is also measuring volume.
Yes, 10mL is smaller than 100mL. The "mL" stands for milliliters, a unit of volume in the metric system. In this case, 10mL is one-tenth the volume of 100mL. This is because there are 1000 milliliters in a liter, so 100mL is equivalent to 0.1 liters.
The largest volume a graduated cylinder can typically measure is around 2,000 milliliters or 2 liters. Some specialized graduated cylinders may have larger capacities, but this is the general range for most laboratory-grade cylinders.
A graduated cylinder is a type of glass container used in laboratories for measuring volume. A 10 mL graduated cylinder can only hold up to 10 mL of liquid.
after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added" after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added"
10ml x 10=100ml 100ml=3.37 US ounces
More info is needed here. I don't know wheather you mean of or outer diameter. If it is OD, there is not enough info to begin to hazard a guess. If you mean of, 10ml cannot equal 100ml and the question doesn't make any sense
Xml/1gm=100mL/5g=20mL Xgm/10mL=5gm/100mL=.5gm =.5g/20mL