A simple whole animal respirometer designed to measure oxygen uptake or CO2 release consists of a sealed container with the living specimen together with a substance to absorb the carbon dioxide given off during respiration, such as soda lime pellets or cotton wads soaked with potassium hydroxide.
Potassium hydroxide is a strong alkali. Therefore it can be neutralized by using a strong acid such as nitric acid or sulfuric acid.
If you mean just potassium hydroxide or its aqueous solution, then no, because their are no chlorine atoms present. The only elements present are potassium, hydrogen and oxygen. Molten KOH produces potassium at the cathode and oxygen at the anode, and the solution gives hydrogen at the cathode and oxygen at the anode.
They are element indicators. O is for oxygen, and H is for hydrogen. OH- is a negative hydroxide ion. They can be formed through electrolysis of water using a hydroxide like Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH). The presence of OH- compounds often indicate alcohol of some type.
Well...nothing is so black and white. Some things react differently in different situations. However...it is most likely you'd be using both of these as bases, and as such, KOH - potassium hydroxide - is likely slightly more reactive than NaOH. This is by comparison of their pKa values alone, and many things may factor into reactivity. If anything, they're both very similar in the grand scheme of things.
try using 'drain opener' or lye aka potassium hydroxide or sodium hydroxide,. very clean one as catalyst, but take more cautious during handling it, very harmful. too much baking soda will clog the vacuum hose, i believe you don't want it happen.:) how do i know the required quantity of patassium hydroxide?
Potassium hydroxide is a strong alkali. Therefore it can be neutralized by using a strong acid such as nitric acid or sulfuric acid.
If you mean just potassium hydroxide or its aqueous solution, then no, because their are no chlorine atoms present. The only elements present are potassium, hydrogen and oxygen. Molten KOH produces potassium at the cathode and oxygen at the anode, and the solution gives hydrogen at the cathode and oxygen at the anode.
Yes, by the electrolysis of molten potassium hydroxide in a voltaic pile. Davy discovered this element with a battery. Sorry if the answer's not quite accurate!!!
Sodium Hydroxide (NaOH). Highly corrosive due to strong alkalinity, be careful when using it.
They are element indicators. O is for oxygen, and H is for hydrogen. OH- is a negative hydroxide ion. They can be formed through electrolysis of water using a hydroxide like Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH). The presence of OH- compounds often indicate alcohol of some type.
Well...nothing is so black and white. Some things react differently in different situations. However...it is most likely you'd be using both of these as bases, and as such, KOH - potassium hydroxide - is likely slightly more reactive than NaOH. This is by comparison of their pKa values alone, and many things may factor into reactivity. If anything, they're both very similar in the grand scheme of things.
Potassium hydroxide does not dissolve fiberglass. Fiberglass is a type of glass reinforced plastic made of fibers embedded in a polymer matrix, while potassium hydroxide is a strong alkaline substance that is typically used as a base in chemical reactions. It should not have a significant effect on the dissolution of fiberglass.
You can do so by either using a pH meter or different pH indicators such as litmus and methyl orange and many others.
Potassium is used in everyday life in various ways. Some common uses include using potassium chloride as a salt substitute, using potassium carbonate in glass production, using potassium hydroxide in batteries, soaps, and detergents, and using potassium nitrate as a fertilizer and in fireworks. Potassium is also essential for our bodies and can be obtained from foods like bananas, avocados, and spinach.
try using 'drain opener' or lye aka potassium hydroxide or sodium hydroxide,. very clean one as catalyst, but take more cautious during handling it, very harmful. too much baking soda will clog the vacuum hose, i believe you don't want it happen.:) how do i know the required quantity of patassium hydroxide?
Manometers can be used to record metabolic gas exchanges of any kind. Measurements of the gas exchange can be recorded using a respirometer as well.
The answer depends on how the question was meant. Each soap made using sodium hydroxide is hard, not only the home-made one. Soaps made using potassium hydroxide are soft. Sodium soap is not soft per-se, when making at home, it can be anything from liquid to pasty when poured into molds, because we used a substantial amount of water to dissolve lye. Soap further hardens as the water evaporates.