0
What else can I help you with?
How do you separate sulfur sand iron filings?
Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.
How will you separate a mixture of common salt and sulfur?
To separate a mixture of common salt (sodium chloride) and sulfur, you can use the process of filtration. The mixture can be dissolved in water, allowing the salt to dissolve while the sulfur remains solid. Filtration can then be used to separate the solid sulfur from the liquid salt solution. The salt can be recovered by evaporating the water.
What are the steps to separating sulfur iron and sugar?
To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.
How do you make liver of sulfur?
To make liver of sulfur, you typically mix potassium sulfide with warm water until it dissolves, then add some small pieces of sulfur and leave the mixture to react and darken over time. Alternatively, you can purchase liver of sulfur already prepared for ease of use.
How do you make 6N ammonium hydroxide?
To make 6N ammonium hydroxide solution, you can dilute a concentrated solution of ammonium hydroxide with water. For example, if you have a 10N solution, you can dilute it by adding water to reduce the concentration to 6N. Make sure to use proper safety precautions when handling chemicals.
How do you separate sulfur sand iron filings?
Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.
How will you separate a mixture of common salt and sulfur?
To separate a mixture of common salt (sodium chloride) and sulfur, you can use the process of filtration. The mixture can be dissolved in water, allowing the salt to dissolve while the sulfur remains solid. Filtration can then be used to separate the solid sulfur from the liquid salt solution. The salt can be recovered by evaporating the water.
What are the steps to separating sulfur iron and sugar?
To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.
What type of solution is used to remove sulfur dioxide?
One common solution to remove sulfur dioxide is to use a wet scrubber system. This technology involves spraying a solution (such as a lime or limestone slurry) onto the flue gas containing sulfur dioxide to neutralize and remove it. The sulfur dioxide reacts with the solution to form a solid byproduct that can be easily separated.
How do you make liver of sulfur?
To make liver of sulfur, you typically mix potassium sulfide with warm water until it dissolves, then add some small pieces of sulfur and leave the mixture to react and darken over time. Alternatively, you can purchase liver of sulfur already prepared for ease of use.
How do you separate a mixture of sugar and sulphur?
To separate a mixture of sugar and sulfur, you can use water to dissolve the sugar while leaving the sulfur undissolved. First, add water to the mixture and stir, allowing the sugar to dissolve completely. Then, filter the mixture; the dissolved sugar will pass through the filter paper, while the sulfur remains on the paper. Finally, evaporate the water from the collected solution to obtain the sugar.
Can fractional distillation best separate a mixture of sand and sulfur?
Fractional distillation is not the best separation method for a sand and sulfur mix. It's a very poor choice as it won't work. Use a solvent for the sulfur like dimethyl ether of, say, diethylene glycol. It will take the sulfur into solution and you can wash the solution out of the sand.
How do you make 6N ammonium hydroxide?
To make 6N ammonium hydroxide solution, you can dilute a concentrated solution of ammonium hydroxide with water. For example, if you have a 10N solution, you can dilute it by adding water to reduce the concentration to 6N. Make sure to use proper safety precautions when handling chemicals.
When edta is insoluble in distilled water then how to make 0.01N edta solution?
use heat to heat the solution and add EDTA slowly to dissolve it.
How can I effectively remove sulfur from my water well?
To effectively remove sulfur from your water well, you can use a water filtration system specifically designed to target sulfur compounds. This system can include aeration, oxidation, or activated carbon filters to effectively remove sulfur and improve the quality of your well water.
How do you separate flour sand and sulfur?
To separate flour, sand, and sulfur, you can use a combination of techniques. First, use a sieve to separate the sand from the flour. Next, mix the remaining mixture with carbon disulfide to dissolve the sulfur. After the sulfur has dissolved, filter the mixture to separate the sulfur solution and the leftover flour particles.
Can you water a garden with sulfur water?
It is not recommended to water a garden with sulfur water as the high sulfur content can be harmful to plants. Sulfur can alter the pH of the soil and affect nutrient availability for plants, leading to potential damage. It's best to use clean, fresh water for watering your garden.
