Acid soldering flux is a chemical used to clean and protect the area (joint) where two pieces of metal come together. Flux poisoning occurs when someone swallows this substance.
This is for information only and not for use in the treatment or management of an actual poison exposure. If you have an exposure, you should call your local emergency number (such as 911) or the National Poison Control Center at 1-800-222-1222.
Alternative NamesFluxes; Flux poisoning Poisonous IngredientNote: This list may not include all sources of fluxes.
SymptomsSeek immediate medical help. Do NOT make a person throw up unless told to do so by poison control or a health care professional.
If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes.
If the chemical was swallowed, immediately give the person water or milk, unless instructed otherwise by a health care provider. Do NOT give water or milk if the patient is having symptoms (such as vomiting, convulsions, or a decreased level of alertness) that make it hard to swallow.
If the person breathed in the poison, immediately move him or her to fresh air.
Before Calling EmergencyDetermine the following information:
The National Poison Control Center (1-800-222-1222) can be called from anywhere in the United States. This national hotline number will let you talk to experts in poisoning. They will give you further instructions.
This is a free and confidential service. All local poison control centers in the United States use this national number. You should call if you have any questions about poisoning or poison prevention. It does NOT need to be an emergency. You can call for any reason, 24 hours a day, 7 days a week.
See: Poison control center - emergency number
What to expect at the emergency roomThe health care provider will measure and monitor your vital signs, including temperature, pulse, breathing rate, and blood pressure. Symptoms will be treated as appropriate. You may receive:
How well you do depends on the amount of poison swallowed and how quickly treatment is received. The faster you get medical help, the better the chance for recovery.
Damage can continue to occur for several weeks after the poison was swallowed.
ReferencesMirkin DB. Benzene and related aromatic hydrocarbons. In: Shannon MW, Borron SW, Burns MJ, eds. Haddad and Winchester's Clinical Management of Poisoning and Drug Overdose. 4th ed. Philadelphia, Pa: Saunders Elsevier; 2007:chap 94.
Wax PM, Yarema M. Corrosives. In: Shannon MW, Borron SW, Burns MJ, eds. Haddad and Winchester's Clinical Management of Poisoning and Drug Overdose. 4th ed. Philadelphia, Pa: Saunders Elsevier; 2007:chap 98.
Reviewed ByReview Date: 02/28/2012
Eric Perez, MD, St. Luke's / Roosevelt Hospital Center, NY, NY, and Pegasus Emergency Group (Meadowlands and Hunterdon Medical Centers), NJ. Review provided by VeriMed Healthcare Network.Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.
It is not recommended to use expired liquid flux for soldering as the effectiveness of the flux diminishes over time, which can lead to poor soldering results. It is best to use fresh flux to ensure proper soldering and avoid issues such as weak joints or oxidation. Expired flux may also contain harmful chemicals that could pose health risks during soldering.
Flux is used when soldering to remove any oxidation on the metal surfaces being soldered, ensuring a clean and strong bond between the solder and the components. It helps the solder flow more easily and uniformly, improving the overall quality of the solder joint. Additionally, flux helps prevent new oxidation from forming during the soldering process.
Borax is added to soldering flux to help clean the metal surface by removing oxidation and impurities. It promotes good wetting of the metal by the solder, helping it flow smoothly and create a strong bond. Borax also helps to prevent further oxidation during the soldering process.
Borax is used as a flux in soldering to clean the metal surfaces being joined and to prevent oxidation during the soldering process. It helps the solder flow more easily and create a strong bond between the metals.
Ammonium chloride is used in a variety of applications such as in fertilizer, as a flux for soldering, in medical treatments, and as a food additive.
Emery cloth and non acid type flux
Flux helps promote soldering. Soldering paste might contain flux and other items to help promote soldering. The paste helps hold the flux in place while beginning to solder.
It is used to clean impurities away from the surface to be soldered or brazed. Many times it is included in the flux. The use of acid type of fluxes is actually detrimental to good plumbing , soldering practices because if the flux is not properly cleaned the joint will eat away from the corrosive action of the acid
Make sure the soldering copper (tip) is clean and free of oxidation add some type of non acid flux and do not over heat
All flux has acid so yes u can as long as u wipe it clean after u solder it will cause Ur joint to turn green
It is not recommended to use expired liquid flux for soldering as the effectiveness of the flux diminishes over time, which can lead to poor soldering results. It is best to use fresh flux to ensure proper soldering and avoid issues such as weak joints or oxidation. Expired flux may also contain harmful chemicals that could pose health risks during soldering.
Acid flux should not be used when soldering electronic components because it can corrode metal surfaces and damage sensitive components, leading to reliability issues and potential failure. Acid flux residues can also be difficult to clean and may create conductive paths that cause short circuits. Instead, rosin-based or no-clean fluxes are recommended, as they are less aggressive and safer for electronics.
Flux is used to prevent oxidation while soldering wires and components in electronics.
The materials being soldered.
Flux powder is a chemical substance used in various industrial processes, particularly in metalworking and soldering. Its primary function is to remove oxidation and impurities from metals, promoting better adhesion during welding or soldering. Flux powder can come in different forms, including rosin, acid, or water-soluble types, depending on the specific application. It is essential for ensuring strong, clean joints in metal fabrication.
A: The pad is not clean it has tarnish or wrong solder with not enough soldering flux. Finally not enough heat.
Gd