0
What else can I help you with?
Are bricks cheaper than cement -made blocks?
No,in both cases same amount of money is spented,bcoz concrete also uses brick to build
Is it cheaper to build a concrete house?
use your brain if you add cost of sugar and sand its still going to smell and therefore smelling is the key to succec i do not know the answer but type in haba haba lalba they have alot of none related infotmation about concrete but you sir make a fine cabbage
Can you build a metal shop over a poured wall basement and pour concrete as the floor of the building and the roof of the basement?
Yes. The question is, is that going to be economical to do so. I suggest you consult an engineer.
What materials were used to build the home Fallingwater?
Wright, as described earlier, found freedom of construction and planning in cantilevered forms, especially those made of reinforced concrete. In this material steel rods join with cement and gravel, hardening into an amalgam of great strength, if properly fabricated. The cantilevered, horizontal elements of Fallingwater were cast in reinforced concrete and finished with a coat of matte, sandy, warm-tinted paint. Where necessary, the slabs were cast with extra rods and concrete, forming integral beams. The slabs may be considered in two ways, as floor and as ceilings.
What are the disadvantages of concrete bridges?
One disadvantage of a beam bridge is that they can be costly to build. Beam bridges can use cheap materials like concrete, but need to be supported with other materials that are expensive like steel mesh.
Need the right concrete contractors in Anderson, SC?
If it is a new driveway, new patios or a new concrete project it is important you get the right people for the job!🏡 Our contractors offer all type of concrete services, quality workmanship, long lasting finish and all sealing services. 💡 Why Choose Us? ✅ Locally owned and operated ✅ Experience for residential and commercial construction ✅ Dudchester received fast and prompt service 📞 Give us a call now to get a free consultation on how we can help you build your dream concrete project! #AndersonSConccrete #Concrete Contractors #Custom Concrete #Driveway Design #Construction
What is a crawlspace?
A crawlspace is a type of home foundation quite common in some parts of the US, specially in the South. Houses are usually built with 3 different types of foundation: concrete slabs, basements and crawl spaces. Concrete slabs are usually placed on top of concrete footings, above grade. Basements are foundations built, or poured into dug pits, usually as deep as 8ft below grade level. Crawlspaces could be considered half way between the concrete slab and the basement. They can be build almost completely above grade, raising the house above terrain level, or half way below grade. The clearance between the floor and the ceiling of a crawl space is usually around 4 ft, so that you can only enter the area by crawling in - thus the name crawlspace. Some people also call crawlspace some service areas built between floors of a multi-level building or between the ceiling of a house and the roof known also as an attic, but the name is most often used to describe the foundation.
How did they build build Burj Khalifa?
They used concrete.
A use of concrete starting with A?
Use concrete to build a nice archway.
How much concrete was used to build the millau bridge?
The volume of concrete used to build the Millau bridge is 85,000 m3 (cubic meters). The weight of this volume of concrete is 206,000 metric tons.
How do you build a model of mt Rushmore?
concrete
How do you get a car on the sims 2 PC?
You have 2 have Sims 2 Nightlife expansion pack. Once you've uploaded it, you just go to build mode, build a garage or driveway, go onto buy mode and buy a car to put ON the driveway!
How do you build a speed bump on driveway?
To build a speed bump on your driveway, start by marking the desired location and dimensions, typically about 3 to 4 feet wide and 3 to 4 inches high. Excavate the area to create a foundation, then fill it with compacted gravel for stability. Next, use asphalt or concrete to form the bump, ensuring a smooth surface for vehicles. Finally, let it cure properly before use and consider adding reflective paint or signage for visibility.
On average how much concrete was used per mile to build I-90?
No one knows the exact amount of concrete used to build I-90. However, it did cost 1 billion dollars to build.
How do you build an external concrete step?
Want to replace an existing subsided external concrete step.
How can I learn how to build a concrete ramp?
To learn how to build a concrete ramp, you can start by researching online tutorials or taking a class on concrete construction. It's important to understand the necessary materials, tools, and techniques involved in the process. Practice and hands-on experience will also help you gain the skills needed to successfully build a concrete ramp.
How can I build a single concrete step?
To build a single concrete step, you will need to prepare the area, create a form for the step, mix and pour the concrete, level and smooth the surface, and allow it to cure before removing the form.
