answersLogoWhite

0

  • In anarid region, concrete placed as a road slab or roof slab gets dried up in a very short time, say within 2 hours.
  • This condition should be maintained for 24 hours or at least till the final setting time of cement at which duration the concrete will haveassumed the finalvolume.Normally curing is done for 28days at 90% of strength gain is achieved
  • Until maximum design strength is achieved (should be 28 days): Concrete does not gain strength by "Drying out". It gains it through a process known as hydration. The road slabs used as an example in the first post will still undergo hydration once water makes contact with the concrete. (rain). k.k
User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

When is green concrete considered cure?

28 days is the usual cure time for structural concrete. For street pavements and driveways made with 6-Sack concrete, 3 days of cure will support a car, but 7 to 10 days is required for it to support trucks. All concrete continues to cure forever, as long as moisture is present.


Is there a method used to shorten the time it takes to cure concrete?

Yes and many so ask the supplier of your concrete.


What is the minimum cure time for concrete placed in temperatures of 50 degrees Fahrenheit or above?

5 days


How long does concrete need to cure in order to achieve maximum strength and durability?

Concrete typically needs to cure for at least 28 days to achieve maximum strength and durability. During this time, the concrete undergoes a chemical process called hydration, which strengthens the material and improves its durability.


How can I form a concrete pad?

To form a concrete pad, you will need to prepare the site by leveling the ground and creating a formwork to contain the concrete. Next, mix the concrete according to the instructions and pour it into the formwork. Use a screed to level the concrete and a float to smooth the surface. Allow the concrete to cure for the recommended time before removing the formwork.


How to pour a concrete pad correctly?

To pour a concrete pad correctly, first, prepare the site by leveling the ground and creating a form to contain the concrete. Next, mix the concrete according to the instructions and pour it into the form. Use a screed to level the concrete and a float to smooth the surface. Allow the concrete to cure for the recommended time before removing the form.


How can I effectively use mold for concrete in my DIY project?

To effectively use mold for concrete in your DIY project, follow these steps: Choose a mold that is sturdy and the desired shape and size for your project. Prepare the mold by applying a release agent to prevent the concrete from sticking. Mix the concrete according to the instructions on the packaging. Pour the concrete into the mold, making sure to fill it evenly. Tap the mold gently to remove any air bubbles. Allow the concrete to cure for the recommended time before removing it from the mold. Carefully remove the concrete from the mold and let it fully cure before using it in your project.


What are the best practices for constructing a shed with a concrete base?

The best practices for constructing a shed with a concrete base include properly preparing the site, ensuring the base is level and compacted, using quality materials, reinforcing the concrete with rebar or wire mesh, and allowing sufficient time for the concrete to cure before building the shed on top of it.


How to fill a hole with concrete effectively?

To fill a hole with concrete effectively, first clean the hole and remove any debris. Mix the concrete according to the instructions on the packaging. Pour the concrete into the hole, making sure it is evenly distributed. Use a trowel to smooth the surface and remove any air bubbles. Allow the concrete to cure for the recommended time before using the area.


What is the minimum time concrete should cure before a load is placed on it?

I't depends on many things temperature, humidity, and so on, but you should be fine after 7 days


How can I effectively use concrete molds for my project?

To effectively use concrete molds for your project, follow these steps: Prepare the mold by cleaning and lubricating it to prevent sticking. Mix the concrete according to the instructions, ensuring it is the right consistency. Pour the concrete into the mold, tapping it to remove air bubbles. Allow the concrete to set and cure according to the recommended time. Carefully remove the mold to reveal the finished concrete piece.


How can I successfully create DIY concrete floors in my home?

To successfully create DIY concrete floors in your home, follow these steps: Prepare the surface by cleaning and leveling it. Apply a concrete bonding agent to help the new concrete adhere to the old surface. Mix the concrete according to the instructions and pour it onto the floor. Use a trowel to spread and level the concrete. Allow the concrete to cure for the recommended time before walking on it. Apply a sealant to protect the concrete and give it a finished look.