0
What else can I help you with?
Water main blank plate?
Yes.
How do you calculate chequered plate weight?
Weight Calculation: Extra weight of chequers length (m) x width (m) x 2.1 = kg/plate Total weight: length (m) x width (m) x thickness (mm) x 7.85 + extra weight = kg/plate Eg: 2400 x 1220 x 6mm Chequer Plate Extra weight: 2.4 x 1.22 x 2.1 = 6.15 kg/plate Total weight: 2.4 x 1.22 x 6 x 7.85 + 6.15 = 144.06 kg/plate
Why strength of steel decreases with thickness?
The thicker a steel plate, the more susceptible the plate is to brittle fracture behaviour. this is due to a large temperature difference or gradient between the inner and outer plate. When the mass of the thick plate is sufficiently great, the harsh cold temperature will induce stress faster than the material can dissipate and hence fracture. this is why the strength reduces with grade and thickness.
What is a pitching plate in roof construction?
a framing member (2x4 or similar), attached to a wall, upon which, sits the top (high end) of a "pitched" rafter.Placement of the plate determines the pitch of the roof, hence the name.---------------------------------------It is more commonly called a ridge board, or if it is designed to transfer load, it is called a structural ridge.Pitching plate iscolloquial, and not a common term in the US.
Is a bolted knife plate connection with timber side plates in double shear?
Yes, it is.
What kind of nails can be used when building a wall?
8d-10d cement coated if toenailing, 12d-16d cement coated if nailing through a plate.
What is the weight of a Cubic meter weight of galvanised steel plate?
The density of steel is 7850 KG/M3
What will be the area of tank if length 1500mm breadth1500mm height 2000mm and plate thickness 6mm given.?
So, inner volume = 1488 * 1488 * 1994 = 4415003136 cubic mm or 4.415003136 cubic metres
What is the weight of a steel plate that is 1half inch thick 20 wide inch and 45 inch long if the steel weight .28 lb per cubic inch?
The volume of the plate is (0.5 x 20 x 45) = 450 cubic inchesThe weight is (450) x (0.28) = 126 pounds
5ft wide 4ft long 1in thick plate weighs?
The mass of the plate will depend on its density. To find the mass, multiply the density by the volume, which in this case is 5/3 cubic feet.?æ
How much does a one half inch 4 foot by 8 foot sheet of plate steel weigh?
A half-inch thick sheet of plate steel measuring 4 feet by 8 feet has a volume of 128 cubic feet (4 ft x 8 ft x 0.5 ft). Steel has a density of approximately 490 pounds per cubic foot. Therefore, the weight of the sheet would be about 62,720 pounds (128 cubic feet x 490 pounds/cubic foot).
How much does a square foot of a one inch steel plate weigh?
Steel is typically 490 lb/cubic foot. There are 1,728 square inches in a cubic foot which means that each cubic inch weighs about .284 pounds (just a bit over a quarter of a pound per square inch).
How do you can measure initial and final setting time of concrete?
Cubic feet, Cubic yards, Cubic Meter or cubic metres if you're from the UK and still spell English words correctly :P also depends what characteristic you are talking about, strength, volume, curing time? concrete can be mesured by its strength(compressive)..
What is the weight of aluminium plate 500 x 1 x 1?
500 x 1 x 1 is more of a rod than a plate but I will answer the question exactly as posed. Also, the question does not say if the units are inches or centimeters, so I will assume inches, and I will assume that the answer should be in (US) pounds. Aluminum has a density of 2.7 grams per cubic centimeter. A rod that is 500 x 1 x 1 is 500 cubic inches. To convert to cubic centimeters multiply by 2.543, or 16.39, giving 8193.532 cubic centimeters. Multiply that by 2.7 to get 22.1225364 kilograms. Divide that by 0.45359237 to get 48.8 pounds.
What type of hardware might be required in order to install a garden gate?
Depending on the size of the gate you would need: the gate, frame, hinges, cement, latch, lock (if required), stop plate and a strike plate. All gate packages vary in size and price and its best to shop around for your needs.
What is the density of 8 mm chequered plate 1m?
That would depend more on the material that the chequered plate is made from. For example, normal mild steel would be about 7650kg per cubic meter. i.e. a specific density of 7.65. I would think what you're looking for is the mass per square meter which is approximately 65.25kg/m2 for a steel plate.
How much does plate aluminum weigh?
It depends on the length and width of the plate, and the thickness. A 12 x 12 inch piece of plate aluminum which is 1/2 inch thick has the same length and width as a 12 x 12 inch piece which is 1/4 inch thick, but the 1/2 inch piece will weigh twice as much.
