0
No, the rebate on the provident fund (PF) is not included in the minimum slab of ₹160,000. The minimum slab typically refers to the income threshold for tax calculations, while rebates on contributions to PF are considered separately. Therefore, the rebate is an additional benefit that does not affect the minimum slab limit for taxation.
What else can I help you with?
What will be minimum covering for roof slab?
The minimum covering of reinforcement for roof slab is 30mm
What is the minimum thickness for flat slab?
The minimum thickness for a flat slab typically ranges from 4 to 6 inches (about 100 to 150 mm), depending on factors such as structural load, span length, and the type of concrete used. However, local building codes and design requirements may dictate specific minimum thicknesses. It's essential to consult structural engineering guidelines and regulations for precise specifications tailored to the project.
What difference suspended concrete slab between unsuspended concrete slab?
Supended slab are slab not sit on the ground directlySuspended slab is a slab supported by beams.
How much type of roof slab?
1. one way slab 2. two way slab 3. flat slab 4. roof slab
What is the meaning of the solid slab?
A solid slab is a reinforced concrete slab which is supported by beams or walls..
What will be minimum covering for roof slab?
The minimum covering of reinforcement for roof slab is 30mm
Minimum and maximum area of steel required in rcc slab as per BS code?
The minimum area of steel required in RCC slab as per BS code is 0.12 to 0.15% of total area. The maximum diameter of bar in slab, shall not exceed D/8, where D is the total thickness of slab.
Income Tax slab rate for 2010 - 2011?
upto 160000 -Nil 160000 to 500000 10% 500000 to 800000 20% 800000 and above 30% upto 1.6 lakh NIL 1.61 lakh to 3.0 Lakh 10% 3.01 to 5.0 Lakh 20% > 5.0 lakh 30%
How much Concrete do you need for a 22 squared slab?
A 22x22 foot slab at a 4-inch thickness/depth requires a minimum of 6 cubic yards.
Gas water heaters must be how high above the slab?
Minimum of 18" by Code.
How manys yards of concrete for a slab 12x20x4?
You will need a minimum of 2.96 cubic yards.
What is the minimum of flate slab design?
Since most flat slabs contain reinforcing steel, the minimum would be the thickness required to cover the steel, generally 2" top and bottom. But the real answer depends on what the slab is supporting and the level of safety required. For a very general situation where the slab is supported on all sides and not significantly longer in one direction, a slab can be 6" wide and support light loading if properly reinforced.
How many yards of cement in a 24x20 slab 4 in thick?
A minimum of 5.93 cubic yards is needed.
How much cement for a slab 10'x10 x4?
A minimum of 1.23 cubic yards at 4" thick.
What is the minimum amount of fill placed under a slab?
The minimum amount of fill placed under a slab is typically around 4-6 inches. This allows for proper support and stability for the slab while preventing settling or cracking. It is important to follow any local building codes or guidelines for specific requirements in your area.
How much concrete do you need for a slab 10 foot by 10 foot by 4 inches?
A minimum of 1.3 cubic yards.
How many cubic yards of concete are needed to pour a slab 60ftX80ftx5in thick?
You will need a minimum of 74.1 cubic yards.
