I think you are talking about embedding steel rods (rebars) in concrete, right? This would make the concrete much stronger. It is called reinforced concrete, and you can make all sorts of structures with it, something that you can't do with ordinary concrete. Though, I am not even sure anyone is using non-reinforced concrete nowadays.
The main disadvantage of compacting concrete using a cement vibrator is the noise. The advantages of compacting concrete using a cement vibrator is to remove trapped air and excess water which then allows the concrete settle firmly.
Concrete reinforcing steel is commonly used in bridges, buildings, skyscrapers and road construction. Reinforcing concrete with steel significantly increases its strength in an economical and safe manner.
A trowel is a flat, steel tool with a handle, meant to "butter" on drywall grout, or to smooth the surface of newly-placed concrete, much like you smooth out the icing on top of a cake. "To trowel" means to smooth a concrete or grout surface, using a trowel.
To make a concrete beam, first, create a formwork using wood or metal to shape the beam. Next, mix concrete by combining cement, water, sand, and aggregates, then pour the mixture into the formwork. Reinforce the beam with steel rebar for added strength, ensuring it's properly positioned within the concrete. Finally, allow the concrete to cure for several days before removing the formwork, ensuring the beam has achieved adequate strength.
By using a stainless steel angle support or channel support rail set in concrete Brick work would be placed on these types of support
The main disadvantage of compacting concrete using a cement vibrator is the noise. The advantages of compacting concrete using a cement vibrator is to remove trapped air and excess water which then allows the concrete settle firmly.
Concrete can be reiforced by using steel; steel can not be reinforced
Reinforcement
RCC means reinforced cement concrete....in this case the reinforcement used is steel bars.....the purpose of using the steel bars in concrete it gives tensile strength to concrete to some extent.
To ensure a successful and durable outcome when pouring a concrete walkway, you should properly prepare the site by leveling and compacting the ground, using a strong and well-mixed concrete mix, reinforcing with steel mesh or rebar, and properly curing the concrete by keeping it moist for several days. Additionally, make sure to follow proper pouring and finishing techniques to avoid cracks and ensure a smooth surface.
allows the use of higher slump of concrete which results in stringer concrete
The amount of steel required in concrete as reinforcement is measured using a formula that calculates the amount of pressure that will be put on the concrete. There are different formulas to identify the minimum and the maximum amount of needed steel, depending on if you are making a beam, slab, or column.
The essential steps for pouring a concrete slab are: preparing the site by leveling and compacting the ground, setting up formwork to contain the concrete, placing a layer of gravel for drainage, reinforcing the slab with rebar or wire mesh, mixing and pouring the concrete, leveling and smoothing the surface, and allowing the concrete to cure properly before using the slab.
Anyone who is wondering the advantage of using a steel rule over a wooden one they would quickly find that the steel rule is much more durable and easy to read. The wooden rule is quite prone to break if accidentally used wrong.
depends on the bridge. They may be built of timber, stone, steel, or concrete.
Bridges are very complex structures that must be carefully engineered using long-lasting and strong materials. Some of the materials that are used for bridge building includes stones, cement, steel, wood, and composites.
section of solid concrete that results from stopping the deck on each side of the girder in a composite floor system constructed using a formed steel deck.