easy to understand any one
ST5 is one of the higher specification mixes in BS8500 and is not suited to hand mixing if compliance with the Standard is required. If it is essential to mix small quantities by hand, the recipe may be appropriate to produce good concrete but it should be assumed that the finished product will be of lesser quality than a true ST5. Good quality materials are essential. -GGR, testcrete@yahoo.co.uk. 12.6.09
by standard consistency test we determine standard consistency of cement which is denoted by p. as we know standard consistency value for a cement its value is used for making the paste for determining setting time, soundness, compressive strength of cement
To satisfy the ASTM standard requirements for normal consistency of cement: The Amount of Water that brings the cement paste to standard condition should vary between 22% to 30% by weight of dry cement.
The standard dead load of an elevator is about 450 pounds. This translates to a kN value of around 0.75.
10 length
we answer quantities precisely by using measuring tools like rulers, and meter sticks :)
The Standard Method of Measurement is used for the measurement of construction works. It gives guidelines as to what should be measured for various parts of the construction process. It allows for estimators to measure works in a standard format for easy preparation of a Bill of Quantities nad easy comparisson of tenders.
The Standard Method of Measurement known is the SMM7 publish by the the Royal Institution of the Chartered Surveyors is the appropriate method of measurement for building works. The SMM7 rules are simplified enough to produce shorter bill of quantities and the contents updated to conform to modern practice.
the seven basic physical quantities ;lenght, mass,time temperature,electric currrent ,luminous intensity and amount ofsubstance which areindependent of any other quantities for their measurement are clled
Derived quantities are quantities that you should be solving for. Ex: Volume, Mass etc Standard quantities are quantities that are specific. Ex: length, seconds, meter. Hop I helped you. :)
The standard measurement of bedding is in inches.
6 millimetres is standard measurement!
standard of weight and measurement
There are 8 pints in a gallon in 'standard liquid measurement'.
standard. Because i can feel it.
Established in 1960 by the international agreement, the "Metric System" is the international standard of measurement.
It's referenced to a national standard....