0
What else can I help you with?
What is the percent of flyash in ppc cement?
the percentage varies from 15% to 35%.
What is the function of flyash in cement?
Functions of fly ash in cement,It is used as a replacement material.Low heat of hydrationGains strength more than that of the ordinary cement.
What are the factors that effects the normal consistency of a cement?
following factors which affects the consistency of cement:- 1. fineness of cement 2. temperature. 3. method of mixing water . 4. %of admixtures in cement (flyash in case of PPC) 5. w/c ratio
What is the percent of flyash in ppc cement?
the percentage varies from 15% to 35%.
What is the ratio for fly ash as the cement replacement in concrete?
Replacement of cement with flyash in concrete is 20-35 % by weight for normal structures. however for special structures like dams the replacement levelscan be increased to up to 70 %. (where flyash must be ISI standards compatible or any such standards) This replacement also reduces water requirement by 2.5 % for every 10 % replacement of flyash used.
Flyash utilization in thermal power plants?
Both flyash and bottom ash are waste created at coal fired power pants. Bottom ash has a larger particle size. The two materials can be used as fill, building mounds (for overpasses on highways), as an aggregate in concrete and in the mix for paving materials.
Flyash bricks class 10 mix properties?
Fly ash bricks class 10 mix properties makes is heterogeneous.
Can fly ash be used in reinforced concrete and prestressed concrete?
There are experimental results showing that the flyash can be used up to 30 % as a cement replacement material. Some up to 80 % flyash has certain properties and it can be used some percent to the concrete mix as a admixture.. Proper trial mix and test shall be carried out for required strength and durability..
What is the function of flyash in cement?
Functions of fly ash in cement,It is used as a replacement material.Low heat of hydrationGains strength more than that of the ordinary cement.
What are the ingredients for concrete solid block?
Concrete block is made from Portland Cement, water, sand and aggregate. The aggregate may be in the form of flyash or cinder from burnt coal.
What is the density of flyash?
The density of fly ash can vary depending on factors such as its particle size and composition, but it typically ranges from 1.9 to 2.4 grams per cubic centimeter.
How do you dispose of lignite waste?
they are many purpose used to lignite waste because it has flyash powder so any chemical company or fertlizer company its used mixxing to that powder and creating new material helpful of lignite waste
What is the formulae for Flyash?
The formula for fly ash is primarily silicon dioxide (SiO2), aluminum oxide (Al2O3), and iron oxide (Fe2O3), along with various other minor constituents. Its composition can vary depending on the source material and combustion conditions.
What kind of work environment does a welder have?
If working in papermills and power houses it's very noisy and dirty work. Extreme heat and during winter you have to try and keep yourself warm. Be around black liquor and flyash. Sometimes working in confined spaces
What are the disadvantages of usage of flyash in concrete for building construction?
If it is a residential building, one difficulty with such bricks could be with the rate of heat dissipation, particularly if you are staying in a tropical region, you could face much difficulty during summer months. Please continue his question, you'll get better replies in due course. Happy questioning.....
