The crossbeam of a window is called a transom.
A direct glazing window is just the transfer of the widely used direct glazing technology of windshields in cars into the window manufacturing process. The glass becomes an integral part of the window thus increasing the stability and stiffness of the whole window. It was first realized by the adhesive company Sika AG. It enables better frame stability, better burglar resistance, smaller frames and better thermal insulation properties. In addition the glazing of the window can be automated.
The minimum distance from ground level to the bottom of windows in basements can vary based on local building codes and regulations. These regulations are typically in place to ensure proper safety, natural light, and ventilation for habitable spaces. It's important to consult with local authorities or building professionals in your specific jurisdiction to determine the exact requirements. However, as a general guideline: Egress Windows: In many jurisdictions, basements used as habitable spaces, such as bedrooms, are required to have egress windows. An egress window is a window that is large enough to provide a safe emergency exit in case of fire or other emergencies. The specific requirements for egress windows can vary, but they typically have minimum width, height, and clear opening size requirements. The bottom of the egress window is typically required to be a certain distance above the finished floor level of the basement, rather than ground level directly outside the window. Natural Light and Ventilation: Even for non-egress windows in basements, there are often regulations in place to ensure sufficient natural light and ventilation. These requirements may specify a minimum height or distance between the bottom of the window and the finished floor level to allow for proper light transmission and airflow. To ensure compliance with local regulations and building codes, it is strongly recommended to contact your local building department or consult with a qualified architect, contractor, or building professional. They will have the most up-to-date information on the specific requirements for window placement in basements in your area.
Vertical glazing systems are becoming more popular as people are more concerned with energy efficiency. Vertical glazing systems are translucent window covers that help to block out the damaging UV rays of the sun. They reduce the heat that would otherwise enter through a window, and therefore can reduce cooling costs significantly.
A lintel is over a window or door and a beam is usually under the structure of the building, either the roof or the floor.
lin·tel (lĭn'tl)n. A horizontal structural member, such as a beam or stone, that spans an opening, as between the uprights of a door or window or between two columns or piers.Above retrieved from Answers.comViper1
Crossbeam Systems was created in 1999.
Crossbeam Systems's population is 300.
The tip of a mast crossbeam is commonly referred to as a "masthead." This component is crucial in sailing vessels as it supports the rigging and often houses equipment such as antennas or lights. In some contexts, it may also be called a "crosshead" or "mast tip," depending on the specific design and purpose of the mast.
Windowcrossbeam
A hinged window is called a casement window.
A crossbeam is a beam (piece of wood/2x4) that traverses the empty space between two walls both under the floor and above the ceiling in a room.
The eyes are the window.
The term crossbeam is an alternative for lintel.
Window glass is called a pane or a light.
A round window in the hull (originally any opening in the hull) is called a porthole. A window in the superstructure is a window.
window alcove
A "window".