answersLogoWhite

0

The standard length of TMT (Thermo-Mechanically Treated) bars can vary depending on the country and the applicable standards. In general, TMT bars are commonly available in standard lengths ranging from 12 meters (39.37 feet) to 15 meters (49.21 feet).

However, it's important to note that TMT bars can also be custom-cut to specific lengths as per the requirements of a construction project. This allows for flexibility in adapting the bars to different structural designs and dimensions.

When using TMT bars for construction purposes, it is recommended to refer to the applicable local standards and consult with suppliers or manufacturers to determine the specific standard lengths available in your region.

What else can I help you with?

Continue Learning about Civil Engineering

What is the TMT 550 grade steel lap length?

Lap Length is the length overlap of two rebars tied to extend the reinforcement length. Lap Length of about 50 times the diameter of the bar is considered safe. Let us understand the term “lap length” with an example: suppose there is a need to build a 200ft tall structure, say column. We know that for convenience of transportation, standard length manufactured are upto 12 metre only, hence to strengthen the structure overlapping of two or more bars are done side by side upto the design length. Reason for doing so is the required tension forces that is needed to transferred from one bar to the other. So if diameter of tmt is A then lap length will be 50A. If both diameter is same. Now coming to question, lap length of tmt 550 grade is usually done where minimum bending stress is encountered. We at Shree Ji Steel offer wide range of sizes and grade for various product range which can be checked from our website Shree Ji Steel Corporation.


What is standard length of steel bar?

14m


What is the unit weight of 10 mm dia tmt bar?

0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm


How tmt steel bar manufactured?

TMT steel bars are produce from Carbon steel material(BILLETs/,INGOTS)Finish steel bar coming out of finishing stage of rolling mill is passed through devise where it is being passed through high pressure water jets to give the steel bars desire quality's 500/550Kg per cms.squre


What is the density of TMT reinforcement steel?

the density of TMT R/F steel is 7850

Related Questions

How you can calculate wt of TMT Bar?

diameter square of the bar. Divided by 162. gives W/1m length


What is the meaning of 500D inTMT Bar?

meaning of 500 D in TMT bar


What is the standard length of steel bar?

40ft


What is the standard towel bar length typically used in bathrooms?

The standard towel bar length typically used in bathrooms is around 24 inches.


What is the TMT 550 grade steel lap length?

Lap Length is the length overlap of two rebars tied to extend the reinforcement length. Lap Length of about 50 times the diameter of the bar is considered safe. Let us understand the term “lap length” with an example: suppose there is a need to build a 200ft tall structure, say column. We know that for convenience of transportation, standard length manufactured are upto 12 metre only, hence to strengthen the structure overlapping of two or more bars are done side by side upto the design length. Reason for doing so is the required tension forces that is needed to transferred from one bar to the other. So if diameter of tmt is A then lap length will be 50A. If both diameter is same. Now coming to question, lap length of tmt 550 grade is usually done where minimum bending stress is encountered. We at Shree Ji Steel offer wide range of sizes and grade for various product range which can be checked from our website Shree Ji Steel Corporation.


What is standard length of steel bar?

14m


What is qst steel bar?

quenched and self temperedsame as TMT bars


How do you calculate oval and square for tmt bars rolling?

TMT bar oval weight Stand oval size in mm like 12mm size bar oval size-12*.8=9.6kg/m


How many 12mm steel bars in one ton?

To calculate how many 12mm steel bars are in one ton (1000 kg), you can use the standard formula: 🔹 Step-by-step Calculation: Weight of 1 meter of 12mm TMT bar: Use the formula: Weight/meter = (Diameter² × 0.006165) = (12 × 12 × 0.006165) = 0.888 kg/m Length of one 12mm bar (standard): 12 meters Weight of one 12mm bar (12m long): = 0.888 kg/m × 12 m = 10.656 kg Number of bars in 1 ton (1000 kg): = 1000 / 10.656 ≈ 93.84 Answer: You get approximately 94 bars of 12mm TMT steel in one ton.


What is TMT Re-Bars?

Thermo mechanical tempered Reinforcing bar or Structural steel


24 bar stools refers to which US length measurement?

This refers to the measurement of a standard bar stool which is 24 inches. Therefore it is talking about the measurement inches and about the typical bar stool length.


How long is a space bar?

There is no standard length of a space bar. Keyboards come in many sizes and have different keys and layouts. The space bar is usually between 3 and 5 inches in length.