0
What else can I help you with?
How you chance 10mm steel bar to 8mm steel bar give formula?
Calculate cross sectional area of 10mm bar amd 8mm bar, then divide them and you will get the no. of bars. For Eg. - Area of 10mm bar = 78.53 sq.mm Area of 8mm bar = 50.26 sq.mm No. of 8mm bars in replacement for 10mm bar = 1.562 bars [ theoritical] In practical u'll provide 2-8mm bars.
What is maximum pitch spacing for spiral reinforcement in the columnc or piles as American building code recommends 10mm diameter bar size and maximum pitch 75mm .Did any other code recommends more?
*
Rolling margin of steel rod which is used for construction?
Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%
What is the soundness of cement?
soundness is nothing but volumetric change of the cement .Presents of chemicals such as CaO,MgO will react with the water present in the cement paste and it will increase the volume of cement paste while hardening.It may causes cracks in the building to avoid that it is necessary to find the soundness of cement before using that.It may vary to each type of cement even for each batch.Soundness should not exceed 10mm for OPC.
Can 8mm tmt steel used in place of 10mm tor steel?
Using 8mm TMT steel in place of 10mm tor steel is generally not advisable, as the two types of steel have different mechanical properties and load-bearing capacities. TMT (Thermo-Mechanically Treated) steel typically has better tensile strength and ductility compared to tor steel, but the reduced diameter means the overall strength and load-bearing capacity will likely be insufficient for applications intended for 10mm steel. It's essential to consult structural engineering guidelines and standards to ensure safety and compliance.
What is the weight of 1meter length of 10mm sariea?
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
What is a weight of 10mm diameter steel bar?
Weight per metre length= 0.559 kg
What is the weight of 10mm tor steel?
The weight of 10mm tor steel rod is approximately 0.62 kilograms per meter.
How many lengths of 16mm rough steel in a ton and 10mm rough steel in a ton?
To determine how many lengths of steel can fit in a ton, you need to know the density of the steel and the specific weight of the steel per meter. Generally, rough steel weighs approximately 7850 kg/m³. For 16mm diameter rough steel, a typical weight is about 1.58 kg/m, allowing roughly 634 lengths in a ton. For 10mm diameter rough steel, it weighs about 0.62 kg/m, resulting in approximately 1,607 lengths in a ton.
How you chance 10mm steel bar to 8mm steel bar give formula?
Calculate cross sectional area of 10mm bar amd 8mm bar, then divide them and you will get the no. of bars. For Eg. - Area of 10mm bar = 78.53 sq.mm Area of 8mm bar = 50.26 sq.mm No. of 8mm bars in replacement for 10mm bar = 1.562 bars [ theoritical] In practical u'll provide 2-8mm bars.
What is the recommended size for a through axle to use with a 10mm diameter?
The recommended size for a through axle to use with a 10mm diameter is 12mm.
What is the volume of a pipe that is 10mm diameter and 200 meters long?
The volume of a pipe that is 10mm diameter and 200 meters long is: 0.015708 m3
What is the area of a circle with a diameter of 10mm?
Area is 78.54mm2
What is weight of 8mm 10mm 12mm 16mm 20mm in kg?
The weights of steel rods with diameters of 8mm, 10mm, 12mm, 16mm, and 20mm will vary based on the specific material used. As an example, the weight of a 1-meter long mild steel rod with a diameter of 8mm would be approximately 0.39 kg, 0.62 kg for 10mm, 0.89 kg for 12mm, 1.58 kg for 16mm, and 2.47 kg for 20mm. These are approximate values and can vary depending on the exact composition of the steel.
How many steel bars in 10mm bundle?
1 bundle 10mm ms rod= how many rod
What is 10 french tubing?
It is a medical tube that 10mm in diameter.
