0
What else can I help you with?
What size steel I beam do I need to span 32 feet with a load of 2500LB at center?
What size steel I beam do I need to span a 32 feet garage with a floored storage above and no posts
What size laminated timber beam is needed for a 23 foot clear span under a 15 foot roof in between load bearing walls?
38 feet longIt is not possible to give a definite answer without more detail. The construction and type of roof will determine the load (weight) bearing on the beam, and factors such as wind load and earthquake load, and the way the roof bears on the beam (truss/point load/distributed load) will all affect the sizing.
What is max height of post and beam construction?
The maximum height depends on many factors like the snow load, the wind load, the size of the building, etc. Typically residential post and beam frames can be three stories or more. Commercial frames can go 60 or 70 feet or higher.
What size steel ibeam is needed for 22 ft span?
This is one of those questions that no one will will tackle because there are other factors that weigh into this type construction: Angle of lift, How will the new beam be supported, Is the foundation sufficent, indoors vs outdoor ect. I'm afraid we do not have enough information to safely answer your question.
What is the standard size of entrance main gate?
There are actually 4 different standard gate entrance sizes. These are 12 feet, 14 feet, 16 feet, and 18 feet.
What is the towing capacity for 1993 4x4 Chevy Blazer 350 Silverado 1500?
if its a full size blazer 7000lbs
What size beam will span 18 feet?
That question cannot be answered without knowing the load on the beam.
What size open web steel joist be used to span 20 feet with dead load of 20psf and live load of 40 psf?
A DLH will work.
What size steel I beam do I need to span 32 feet with a load of 2500LB at center?
What size steel I beam do I need to span a 32 feet garage with a floored storage above and no posts
What affects Bed load particle size?
what is bed load particle size
What size of beam will span 18 feet with a load of 2130psi?
That depends on many other factors. What is the beam material? Is the load a point load concentrated in one spot, or is it uniform across the total span? Specing beams is something that should be left up to a qualified person.
How do you determine the size of electrical conductors?
by the size of the load they are connected to. a general lighting circuit in a home should be 500 sq feet. an appliance will have it's connected load on the name plate. all electrical components [ plugs, cord, wire, anything electricity flows through] must be DERATED 20 %. if your load is 30 amp 240, add 6 amp[20%]to the 30, for 36amp. the closest wire size is #8.
What size diesel generator would you need if there was a power outage?
The size of the generator is based on the size of the load you want to supply. Size up the load in watts or amps along with what phase (single or three) and voltage that the load requires. These are needed to give a complete answer.
What size beam can safely span 43 feet with a load of 1200 pounds?
There are too many variables to consider for your application. You should consult a qualified engineer for this project.
What size eye beam can safely span 25 feet with a point load of 4000 lbs in the middle?
You will also need to include the acceptable amount of deflection in your question.
What size wire needed with a 100 amp load 250 feet away?
The question is one of voltage loss. The goal is to have enough ampacity in the selected conductors to run the maximum load with only 3 percent voltage drop, caused by the resistance inherent in the wires. Plug your numbers into a voltage drop calculator online and see what pops out. At 120 volts you would get 3.1 percent drop using 3/0 wire. At 240 volts you could drop down three sizes to #1 AWG for 3.1 percent at max load, or 1/0 size for 2.5 percent drop at max load. Assuming copper wire at normal conditions of temperature.
What is the size cubic feet of the Kenmore model 11092573200 washer?
The Kenmore model 11092573200 washer has a capacity of approximately 3.5 cubic feet. This size is typical for standard top-load washers, making it suitable for average laundry loads. Always refer to the manufacturer's specifications for precise details.
