According to the Home Maintenance And Repair Database at the Michigan State University website:
Use suds on a soft brush to rub any spots lightly. Then dip the shade up and down. When the water gets dirty, change to clean sudsy water. Wash the shade a second time. to rinse the shade, dip it up and down through two or three changes of clean water. Don't worry if the cloth stretches and sags while it is wet. It will tighten up for a snug fit when it gets dry.
To dry a fabric shade, tie a string to the middle of the frame. Then hang it over the bathtub or hang it from a clothesline outdoors to drip dry. Or you can wipe the shade with a bath towel until it is almost dry. Then put it back on the lamp and turn on the light so the heat from the bulb will help it to finish drying. If the lampshade has ruffles, "press" them with your finger.
Note: Use caution not to let the shades come loose from the frames when saturating shades with water. The weight of the water can cause some shades to do this, so it may be best to 'roll' the shade in water on its side, rather than to dip up and down.
My Preferred MethodIf the shade is just dusty, use a clean, dry paint brush (reserved for dusting only) and brush in an up and down motion to clean the shade. This will safely remove the dust, even from tiny pleats and crevices, and won't damage the shade.Yes, the lamp shade fits the lamp.
This sounds like a beautiful lamp so don't take chances and take the shade off and take it into a VERY WELL KNOWN dry cleaners and have your lamp shade done the professional way. There are several methods you can use to do it yourself, but it's not worth the risk for such a beautiful lamp shade.
To replace a shade on a lamp, first, remove the old shade by unscrewing or unclipping it from the lamp. Then, measure the diameter of the lamp's fitting to ensure the new shade will fit properly. Finally, attach the new shade by securing it onto the lamp's fitting, making sure it is stable and secure.
The purpose of a lamp shade collar ring is to provide structural support and stability to the lamp shade. It helps to hold the lamp shade in place and prevent it from slipping or moving around on the lamp base. Additionally, the collar ring can also enhance the overall design of the lamp shade by adding a decorative element and creating a more polished look.
The piece that screws the lamp shade onto the lamp is called a finial. It is typically a decorative knob that screws onto the lamp's harp to secure the shade in place.
lamp-post -------- Lamp-shade
You can find floor lamp shade replacements at home improvement stores, lighting stores, online retailers, and specialty lamp shade shops.
If your lamp shade is a fabric, all you have to do is to wash it in bathtub. If you don't have a bathtub, you can use your large sink. Just put an enough cool water from it, add a mild soap on it and put the lamp shade on your tub and roll it. After a few minutes, drain the water on your tub and refill it with clean water and wash your shade again. If you're that with it, just use your blow dryer to make your shade dry. I hope this is useful for everyone.
To properly screw on a lamp shade, first place the shade on the lamp socket and align the notches on the shade with the grooves on the socket. Then, gently twist the shade clockwise until it is securely attached. Be careful not to overtighten to avoid damaging the shade or socket.
The best way to create a custom lamp shade using a lamp shade template is to first choose a fabric that you like and cut it according to the template. Then, apply adhesive to the fabric and carefully wrap it around the template, making sure it is smooth and secure. Finally, trim any excess fabric and attach the lamp shade to the lamp base.
form_title= Lamp Shades form_header= Buy new lamp shades to give your home a new look. How many lamp shades do you need? What size lamp shade?*= _ [50] What color lamp shade?*= _ [50]
First, lamp shades diffuse the light. Instead of looking at a bright bare lightbulb, you look at a much larger glowing shade that that bulb illuminates. The shade cuts out some of the light, but the light that you're left with is far more pleasant to look at.A lamp without a shade casts sharp-edged shadows. If your lamp has a shade, the shadows it casts tend to be soft edged. Again, this makes things look better.Second, in the old days when lamps that used open flames, a lamp shade would cut down on drafts that could make the flame flicker or even blow it out. A glass "lamp chimney" worked even better, but those were expensive compared to a paper and wire shade.