0
What else can I help you with?
How to Replace rear brake light on 2000 odyssey?
Open tailgate to fully open position. Find two plastic openings on inside of housing. Using a flat screwdriver pop open. Remove two Phillips head screws. Pull entire housing straight to the rear. This will remove plastic pin from body quarter panel. Twist plastic bulber holder in a 90 degree rotation. Remove bulb from bayonett receiver and replace with new bulb. Repalce housing in reverse order.
How do you change the front turn signal bulb in a 2004 Toyota Highlander?
get cardboard- beer- small sharp screwdriver and tour paw. Don't open hood -drink a sip of beer - if right turn signal turn front wheels to left-sip beer- sit on carboard by wheel -take small screwdriver or knife and in the wheel well there are two bayonett type fastners holding the plastic mud guard to fender-they are about at 12 and 3 oclock looking at wheel-- pry out slightly the inside plug-the fastner should be loose- sip beer- pull back the plastic guard enough to stick your fat paw into the open wheel well- the side marker/blinker should be right in front- give 1/4 turn and out the holder pops- sip beer- turn bulb to release - replace should cost about $5.00 for 2 pack - reverse process -finish beer
