Open tailgate to fully open position. Find two plastic openings on inside of housing. Using a flat screwdriver pop open. Remove two Phillips head screws. Pull entire housing straight to the rear. This will remove plastic pin from body quarter panel. Twist plastic bulber holder in a 90 degree rotation. Remove bulb from bayonett receiver and replace with new bulb. Repalce housing in reverse order.
Original equipment part for brake light replacement on 2000 Honda Odyssey EX is: 7443 W21/5W STANLEY 12V 03U E4 2DW
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
how to replace the brake light switch at the pedal of a 2001 ford zx2
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
Pull the carpeting behind the brake light. Unclip the assembly, replace bulb.
how do you replace a 2000 handa odyssey radiator
there is 2 plastic pieces (red) on either side of the light remove those, careful they break easy then two screws pull it off, and replace the bulb
There is a sensor in the top of the brake cylinder where you put in the fluid. Replace it and the light will go away.
Just unscrew the rear brake light, turn out the socket, and replace the bulb.
check your local mechanic
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
How do i replace brake lines on a 2000 grand am