0
Tonewood is the term generally used to designate wood with recognized and consistent acoustic qualities when used in the making of Musical Instruments. The type of wood used on stringed instruments (such as a lute, a violin or a guitar) is a much debated factor contributing to its tone. A musical instrument is usually made with several kinds of wood. Since sound is generated through vibration, the instrument's primary wood is selected for the particular characteristics of its vibration. In parts of the instrument not responsible for generating tone, woods are selected for other reasons: a hard wood for the fingerboard, an easily-worked wood for decoration, and so forth. The woods that don't absorb and deaden the sound are considered "tonewoods".
There are a considerable variety of different tonewoods used in lutherie. Below are descriptions of the general tonal properties of some of the most widely used tonewoods. It is common to employ at least two different tonewoods: one or more varieties for the back and sides, and one for the sounding board, or "top". The uniformity of the material and moisture content in the wood affects the tone or sound of the stringed instrument. Moisture in the wood affects the sound: the best sound usually found in woods that are very dry. Guitar wood is dried to less than 6% moisture content (below the range of most wood moisture meters) in heated storage for a total of three to six months before final precision machining of the wood. Wood for lutes and violins is usually dried for several years.
What else can I help you with?
Is it more stylish to match the wood tone of your cabinets to the wood tone of your kitchen table?
Yes, you want to match the tones to look stylish.
What are the differences between ash and alder wood for guitar bodies, and which one is better for achieving a specific tone?
Ash wood is denser and heavier than alder wood, which can result in a brighter and more resonant tone. Alder wood is lighter and softer, producing a warmer and more balanced tone. The choice between ash and alder wood for guitar bodies depends on the desired tone - ash for a brighter sound and alder for a warmer sound.
What is a select spruce top guitars?
Its the spruce (Sitka Spruce 5 A Grade being the best)that is selected for the Guitar, its usually stright grain and has excellent tone when hit. (you check the tone of the wood by hitting it, it will have a tone like a musical note, wood without good tone will have a dull thud, no tone).
How can I effectively remove the yellow tone from wood?
To effectively remove the yellow tone from wood, you can sand the surface to remove the existing finish and then apply a wood bleach or wood stain remover to lighten the color. Make sure to follow the manufacturer's instructions carefully and test the product on a small, inconspicuous area first. After removing the yellow tone, you can refinish the wood with a clear coat or stain to achieve the desired color.
How do you spell tymber?
depends on what you speak: wood = timber tone = timbre
What material is lighter wood or metal?
a tone of bricks You should be specific on this question, dry wood, wet wood, also what kind of wood? It does matter, this goes for the metal too. { vgtalotta } [at] { hotmail } [dot] { com }
What are the differences between alder and ash wood used in Telecaster guitars, and how do these differences affect the tone and overall performance of the instrument?
Alder wood is lighter and softer than ash wood, which affects the tone of a Telecaster guitar. Alder produces a warmer, balanced sound with good resonance, while ash provides a brighter, more articulate tone with strong sustain. The choice of wood can impact the overall performance of the instrument by influencing its weight, sustain, and tonal characteristics.
What is the natural stain color of the wood used in this furniture piece?
The natural stain color of the wood used in this furniture piece is a warm, medium brown tone.
What is light colored wood called?
Light colored wood is often referred to as blondewood or lightwood due to its natural pale tone. Examples include birch, maple, and ash.
Can wedding be used as a verb?
Yes. Used to denote combining, as in "wedding wood and plastic to create a richer tone".
What kind of wood would be on a 1978 Eames Lounge chair and Ottoman?
The wood is more-than-likely Walnut. If it has a slightly red-tone, it may be Brazilian Rosewood, although it is rare.
What are the unique qualities and benefits of an alder wood guitar compared to other types of wood used in guitar construction?
Alder wood guitars are known for their balanced tone, good sustain, and lightweight feel. They offer a clear sound with a strong midrange, making them versatile for various music styles. Alder wood is also durable and resonant, providing a responsive and dynamic playing experience. Overall, alder wood guitars are favored for their unique combination of tone, playability, and aesthetics compared to other types of wood used in guitar construction.
