When meats thaw, they general lose juices which can drip through packaging. These juices can contain pathogenic bacteria. A drip tray will keep the juices contained so they don't contaminate anything else.
so that if it springs a leak you can put a drip tray underneath
i knew it in child but now i forgot it sorry
You can find a replacement drip tray for a west bend 3 in 1 coffee center 55108 from the manufacturer. You can also find replacement part numbers in the owner's manual.
First, check to see if the drain line is clear and try bening the heat element closer to the drip tray. This is so that when the fridge goes through a defrost cycle it will keep the tray warm enough to drain the water without freezing. Also, you can purchase a heat sheild that can be installed on the drip tray and it will have a defrost element wired to keep the drip tray warm enough inorder to drain the water.
To cook large items.
jhj
The purpose of a drip leg in the gas piping is used as a device to capture dirt and debris from entering the furnace.
By drip and sprinkler system
I use mine to freeze ice cubes
Yes it has a removable drip tray for easy clean-up.
The indoor part of a domestic split A/C essentially consists of cooling coils and a blower fan. Air from the room is pulled over cold coils and the air is cooled. Colder air can hold less humidity than warm air, so water vapour condenses as liquid on the coils. The cold, dry air is blown back into the room. Meanwhile, the water on the coils drips on to a gutter or drip tray. This has an outlet which typically connects to a pipe on or inside the wall, and the water drains to the domestic drainage or else to outside. The A/C drips water when the drip tray is full, normally because of a blocked outlet. The solution is to remove the A/C case and clean out the drip tray and outlet. Owners' manuals usually say to leave this to an appropriately qualified technician. As for prevention, the air inlet of a split unit includes filters to trap dust. It is this dust that finds its way on to the coils and gets washed into the drip tray by the condensing water. Keeping the air filters clean should decrease the amount of dust that gets on to the coils and therefore increase the period between sessions of cleaning out the drip tray.