Generally the exhaust lash is more than the intake. The engine data plate should have the valve lash info stamped on it.
when you removed cylinder head or when they are noisy . do it when cold ( 8 thou for intake )and (12 thou for exhaust )
Both Exhaust & Inlet Clearances are 0.30mm = 0.012"...or..12 thou HOT
8 Thou INLET and 6 Thou Exhaust
inlet 2 to 6 thou. exhaust 6 to 10 thou.
J2 engines are as follows Inlet: 10 or 12 thou, Exhaust: 14 thou.
inlet 2 to 6 thou. exhaust 6 to 10 thou. 0.05-0.15 mm inlet. 0.15-0.25mm exhaust. I have done mine today and confirm these settings are good. Nice and quiet now
Just been told on the phone by a mech friend its ten thou for the inlet and twenty thou for the exhaust,these have to be done cold.
In the King James version, the words "thou shalt not" appear 219 times in both the Old and New Testaments.
It was written in the Ten Commandments. Right before thou shalt not kill.
Thou
hey man. tappet clearances are almost always in the manual of any car.. dont have the manual anymore? go to your local city library! they have car manuals from practically a-z! INLET ...10 thou... EXHAUST ....12 thou HOT.
Thou shalt know your goal in life Thou shalt set your priorities in life Thou shalt keep your rest day holy Thou shalt be humble and accept the help of others Thou shalt always be motivated and inspired in your studies Thou shalt manage your time well Thou shalt not cheat Thou shalt always be prepared Thou shalt be organized always Thou shalt always be clean