screw driver :)
A simple machine with spiral grooves is a screw, which converts rotational motion into linear motion. A person who steers a moving vehicle is typically called a driver. The driver controls the vehicle's direction, often using a steering wheel, which is a fundamental component of vehicle navigation. Together, screws and drivers exemplify how simple machines and human action work in tandem to facilitate movement and control.
depends if their dogging.
The use of a machine to move air. In medical terms, a machine to aid a person in breathing by moving air into and out of their lungs.
Zero velocity means that the vehicle and the person who is measuring the velocity are moving together.
if your vehicle is staionary (not moving) then the person who hit you is at fault
How can the person not moving be at fault? If we hit a pole or a snowbank we are deemed at fault, regardless of the circumstances, because they were not moving. Care and control of your own vehicle comes into play in this situation.
They would be at fault. Your vehicle was stationary and they were moving.
front seat passengerrear seat passenger that are of legal ageIn the U.S. no person is allowed to consume alcohol in a moving vehicle. Unless....the vehicle is a limo or a motor home. In those vehicles anyone in the rear of the vehicle of legal drinking age can consume alcohol.Sadly, it appears a fool gave the 1st answer.
See 22517 California Vehicle Code: "No person shall open the door of a vehicle on the side available to moving traffic unless it is reasonably safe to do so and can be done without interfering with the movement of such traffic, nor shall any person leave a door open on the side of a vehicle available to moving traffic for a period of time longer than necessary to load or unload passengers."
A person would experience the most air resistance when moving at high speeds, such as when skydiving or driving a fast-moving vehicle. The resistance is greater in environments with higher air density, such as at lower altitudes.
A person controlling a machine is called an 'Operator' think of it as Operating a machine, not controlling it.
Friction can occur between surfaces in contact, such as the wheels of a moving vehicle on a road, a person walking on the ground, or when brakes are applied to slow down a moving object.