When brakes cause a vehicle to steer to the right or left during braking, it can indicate uneven brake force or problems with the braking system. This may occur due to issues such as worn brake pads, damaged rotors, or misaligned suspension components. Additionally, differences in tire grip or pressure on one side can exacerbate the problem. It's essential to address these issues promptly to ensure safe vehicle operation.
Dual diagonal braking is where the brakes are on two systems right front and left rear as well as left front and right rear. This is to give even braking in a partial system failure
It depends on where it is on. Normally the braking force is balanced on an axle but different between axles. i.e., the braking force between left and right brakes on an axle is the same but the braking force on the front axle might be greater than the rear.
No. You will only need to replace the brake shoes if they are worn down. Generally the front brakes do 70% of braking leaving the rear with 30%, which will cause the front pads to wear first. What is important however is that you replace either front brakes or rear brakes as a set. i.e. if you're replacing the front brakes do the right and left side.
If the brakes are firm and the car is still not stopping, something is not hooked up right in the braking system. Perhaps a spring is missing from the brake shoe assembly.
That will cause you to lose control, since braking will be uneven. Take foot OFF the gas, brake gradually, slow WAY down, ease back unto pavement.
Any vehicle that was not parked.
The pads may be worn out. have it checked out.
Have your brake system inspected. Sounds like you have a caliber sticking.
An indication that you need to have your brakes inspected immediately includes hearing unusual noises, such as squeaking or grinding sounds, when you apply the brakes. Additionally, if you notice a decrease in braking responsiveness or if the brake pedal feels soft or spongy, it’s crucial to seek inspection right away. Other signs include vibrations or pulling to one side while braking, as these can signify serious issues that require prompt attention.
right
the brake rotors are warped. resurface or replace rotors. if the vehicle shakes without applying the brakes, check tire balance.
The symptoms of a 1999 Chevy K3500 pulling hard left while driving and then hard right while braking could indicate several issues. It may be caused by uneven tire pressure, worn suspension components (like shocks or bushings), or misaligned wheels. Additionally, problems with the brakes, such as a sticking caliper or uneven brake pad wear, could contribute to the vehicle pulling to one side during braking. A thorough inspection of the tires, suspension, and braking system is recommended to diagnose the issue accurately.