0
What else can I help you with?
Can you Replace 3.5 condenser with 4 ton condenser?
That depends on 1) what indoor coil you have, 2) is the ductwork adequate to support 4 tons and 3) if the indoor coil and ductwork are suitable does the blower have the capacity to support 4 tons or 1600 cfm? If so it must be sped up.
Your house is 2400 square feet and has a 4 ton air conditioner Can you replace the outside unit with a 5 ton or does the codenser coils have to be replaced also?
You have to replace the condenser too.You need a bigger condenser to discard the heat from your space that the bigger compressor sucks. Andreas Petrides from Cyprus
How many pound of r22 refrigerant is in 2 ton condenser?
A 2-ton air conditioner typically contains around 4-5 pounds of R22 refrigerant.
What size ac condenser unit is needed for 1500 sq ft house?
4 ton
Can a 3.5 ton evaporator be used with a 4 ton condenser?
yes it can. you can you can only downsize a coil by .5 tons or up .the flowrator piston have to be be changed according the the condenser size don't ever try to go more than1/2 ton it would damage the system.
Can a 4 ton evaporator be used with a 3.5 ton condenser?
yes it can. you can you can only downsize a coil by .5 tons or up .the flowrator piston have to be be changed according the the condenser size don't ever try to go more than1/2 ton it would damage the system.
What tonnage is this lennox condenser unit model hs19-511u-3p?
4
What ton unit should you have inside if you have a 4 ton ac outside?
It depends on the cooling load for the home. air conditioners are sized and rated as a matched system consisting of the condenser and evaporator. The capacity of the system changes with the different evaporators. Usually you use either the same size as the condenser or 1/2 ton larger.
Can a 4 ton indoor evaporation unit be matched to a 3 ton condenser unit to make it more efficient?
No. It will be less efficient.
Can 4 ton outside condenser unit work with inside air handler5 ton?
Yes, a 4-ton outside condenser unit can work with a 5-ton inside air handler, but it may not operate efficiently. The condenser's capacity is lower than the air handler's, which could lead to undercooling or insufficient dehumidification. It's generally best to match the capacities of the condenser and air handler for optimal performance and efficiency. Consulting an HVAC professional for proper sizing and compatibility is recommended.
Can you match a 3.5 ton air handler by Gibson 13 seer with a 4 ton 13 seer Rheem air handler?
You can't match an air handler to an air handler. I assume you meant a 3.5 Ton A/H to a 4 Ton condenser. The answer is no. If the A/H was 4 Ton & you had a 3.5 Ton condenser you could with an expansion valve setup. You should really match equipment when possible & I highly recommend using a qualified technician.
Can 4 ton condenser work with 5 ton air handenler?
Yes, a 4-ton condenser can work with a 5-ton air handler, but it may not operate efficiently. The mismatch can lead to inadequate cooling or heating, as the air handler may not be able to effectively utilize the cooling capacity of the smaller condenser. It's essential to ensure the system is properly balanced to optimize performance and energy efficiency. Consulting with an HVAC professional is recommended to evaluate compatibility and make necessary adjustments.
