0
What else can I help you with?
How do you Drive a 4 Speed Transmission with 2 Speed Rear Axle Flatbed Truck?
Start in 2nd gear in your transmission and low range in the rear axle(switch down), then shift to 3rd, then 4th(using the clutch). When on level ground and need to get truck up to road speed, shift axle into high range(switch up). To go to high axle range, keep accelerator down, pull switch up, then gradually release accelerator and pause until shift is completed, then accelerate as needed. To go to low axle range, when climbing a steep hill and losing speed, keep accelerator down, push switch down, release and quickly depress accelerator. When shifting axle, you don't have to use the clutch.
Do you need to take of the clamp holding the axle?
Yes, in most cases you need to remove the clamp holding the axle in place before replacing or removing the axle. This clamp keeps the axle secure, and taking it off is necessary to access the axle.
What are the signs of a bad axle on a car?
Need to know year, make , model, front axle or rear axle to help you.
When you are replacing a transmission in your 1999 Dodge Ram Diesel Pickup Truck do you need to remove your front axle?
The front axle itself does not need to be removed.
2001 ford f250 front axle noise clunk on braking and a clunk when I go into 4x4 on fly.?
Don't switch on the fly, that's just stupid. You'll need a whole system overhaul.
How can I remove the axle from the hub?
To remove the axle from the hub, you will need to first loosen the axle nut using a wrench. Once the nut is removed, you can slide the axle out of the hub by gently pulling it. Be careful not to damage the threads or the axle during this process.
What license do you need for a 6 wheel dumper?
Whoever answered this question is WRONG. If you are talking a "single axle" (One steering axle and one drive axle with 2 tires on the steering axle and 4 on the drive axle) you do not need any special license
How do you replace the axle on a 1993 Honda Civic?
To replace the axle on a 1993 Honda Civic the axle nut has to come off. The hub assembly also will need to be pulled back so the axle can be pulled from the transmission.
Cv axle removal from transmission on a 1995 Mazda 626 on the drivers side?
There is one main thing you will need to know when removing CV axle from the transmission on a 1995 Mazda 626 on the drivers side. You will need to know that the circlip is what holds the axle. If you unclip that the axle will fall right out of the transmission.
What is the weight of a Volvo Dump Truck?
Need to know the specific model and configuration (e.g., single axle, tandem, tri-axle, quad axle, centipede) in order to answer this.
Why would you need a audi axle?
An Audi axle is would be necessary if, for some reason, you broke the axle of your Audi. You should be able to find one at an Audi dealership.
How do you repair a 1999 F-250 front axle?
the repair of axle depends on what is wrong with it need more information on problem
