0
What else can I help you with?
What will be the weight in kg of 1 liter of furnace oil having specific gravity of 0.998 and temperature 30 degree centigrade?
1 litre of furnace oil will have a mass of 0.998 kg. The temperature of the oil is irrelevant.
How do you convert 1kg furnace oil into liter?
You need to find the density of the oil, from this you will be able to calculate the volume.
How much does oil expand when it gets hot?
Oil expands about 0.07% for each degree Celsius increase in temperature. This expansion can lead to changes in volume, pressure, and viscosity in the oil.
How to convert an oil furnace to an electric furnace?
How can you covert an oil furnace to an electric furnace
What is the density of furnace oil at 120 degree c?
The density of furnace oil at 120 degrees Celsius may vary depending on the specific composition of the oil. However, as a general estimate, the density of furnace oil at this temperature is typically around 0.9 - 0.95 grams per cubic centimeter.
Oil Furnace Installation ?
form_title= Oil Furnace Installation form_header= Heat up your home with an oil furnace. Do you need an old furnace removed? *= () Yes () No Do you currently have an oil furnace?*= () Yes () No How old is your home?*= _ [50]
Can you mix kerosene and home heating oil in an oil furnace?
Kerosene and home heating oil can be mixed in a oil furnace. Kerosene is thinner than heating oil. Mixed together will make the furnace burn cleaner.
How can you re-ignite an oil furnace?
Don't try to do it yourself. Be safe and try to get a furnace technician to help reignite the oil/diesel furnace from a company that specialises in furnace repair instead.
What is technology of oil fired furnace?
An oil fired furnace works by using oil and a flame. The oil is sent through a tube to the burner area of the furnace and when the oil is ignited with a lighter, the flame can be adjusted according to how much heat is necessary.
What type of oil is in furnace oil?
its #2 oil or pentane
What is furnace oil?
Furnace oil is the source of fuel used by the heating system to create a consistent warmth when required.
Which range of density meter should you use for furnace oil?
Furnace oil is mainly measured in centistokes (cST). It could vary frm 0-1000 cSt. It basically means the quality of furnace oil used in your application process. For eg. In Furnace oil boiler its mostly recommended at 125 cST grade to be used. The better the furnace oil the better its is for your equipment giving less maintenance cost and saving energy in process. There are other factors like pour point, flash point, etc which are also major factors in furnace oil and would be available with your furnace oil supplier.
