0
The dimmer switch has likely failed. Replace it.
REVISE:
Check your fuses and your bulbs. Alternatively, the switch that controls your bright lights may have failed. To check it, take it out and check for current flow or resistance with a multimeter when switch is on vs. when it is off. You may also have a hi-beam relay, if so, check it as well (swap with known working relay of the same kind, i.e. horn relay)
What else can I help you with?
How do you turn the high beams on and off on a 1995 Chevy Corsica?
Should be like any other vehicle. (pull turn signal stick back (high beams on), pull it back again (high beams off).
If you are using your high beams at night and another car approaches what should you do?
You need to turn your high beams down and ,after the car passes, you may turn them back to high beams
How do you switch from high beam to low beams on 99 ford explorer?
Pull back on the turn signal lever to change from high beams to low beams If the turn signal lever is pushed forward the high beams stay on and if the turn signal lever is pulled back all the way that is the " flash to pass " feature
1999 ford explorer no low beams and only high beams when the switch is held back?
Yes. That is by design. Pulling back on the switch is used for 'flash to pass'.
When traveling at night with the high beams on how far behind a vehicle must you be before you have to switch back to the low beams?
300 Feet.
Where is the dimmer switch on 2001 dodge ram?
Pull the turn signal lever toward you to switch to high beams and back again Pull the turn signal lever toward you to switch to high beams and back again
What happens if you drive with high beams in fog?
You wont be able to see anything, the light will just bounce back off the fog, never ever drive with your high beams on in hevy fog. just keep your low beams on.
How do I turn my high beams on in a 1970 Chevy c20?
To turn on the high beams in a 1970 Chevy C20, locate the floor-mounted dimmer switch, usually situated to the left of the brake pedal. Press the switch down with your foot to activate the high beams. You may need to pull it up to switch back to low beams. Always ensure your headlights are turned on before attempting to switch between high and low beams.
Is it best to use your high beams in fog?
No, it is best to use your low beam lights in fog. High beams are aimed higher. They bounce off the fog, reflect back to you, make it harder to see.
Where is the switch location for changing from high beams to low beams on a 1989 Pontiac Grand Prix?
It should either be on the dash board where you can turn your interior lights on or you should pull back on the directional to switch. Cars run with the low beams on and the high beams are switched to in the dark when you feel you need extra light. I feel bad for the people that have been coming in the other direction from this car if its high beams have been on constantly.
Should you use your high beams when you are driving in fog or snow?
Use your low beams or fog lights. Fog or snow will reflect high beam light back in your eyes making it more difficult to see.
What should you do when you vehicle encounter a vehiche withits high beams on?
Flash by putting your high beam on and switching back to low beam
