To fit a spare wheel carrier to a Citroën C4 Grand Picasso (GP), start by ensuring you have the correct carrier model for your vehicle. Begin by locating the mounting points on the vehicle's chassis, typically found at the rear. Securely attach the carrier using the provided bolts and brackets, ensuring it's properly aligned and tightened. Finally, place the spare wheel onto the carrier, ensuring it is securely fastened before use.
the 2007 gp4 never did i bought a carrier kit and bolted one underneath
Yes of course just get some very strong wire and tie it to the boot
Not fitted as standard but if your car has standard suspension not hydraulic you can fit the lifting gear and buy a spacesaver spare. The studs for the lifting/mounting assembly are fitted to the car. For more info. C4owners.org I've fitted a wheel on mine.
yes an it will look good
Yes.Any c5 wheel will fit any c4 after 1987 without any adapters needed.
Depends on the bolt pattern. You may need wheel adapters to fit it though if they're different bolt patterns.
They are 17 in by 9.5, hope that helps. You can also go to Smokinvette.com and see all the different wheels that will fit your Corvette! Good luck!
In the Citroën C4, the spare tire is typically located in the trunk under the floor mat. You may need to lift the mat or a cover to access it. Some models may come with a tire repair kit instead of a traditional spare tire, so it's essential to check your specific vehicle configuration.
The offsets are different so they most likely will not fit.
Not without an adapter.
Most C4 Corvettes.
The Ford C4 transmission will fit.