With you lower palm, force the handle closed. Kneel down, push the handle up, then with a hard upstroke, hit the handle, again, withe the lower palm.
Yes, a 2003 Ford Ranger tailgate will fit a 1993 Ford Ranger. As of July 2013, the average price of a new tailgate for a Ford Ranger is around $160, plus tax and shipping.
Yes you can put it on the hood or on the tailgate.
The inside of the tailgate, that is the part that faces up when the tailgate is down will have a panel that is held on by screws, it will give you access to the inner workings. Usually it is a little 20 cent retainer that has broken and is available at any parts store.
use a flat head screwdriver to open the mechanism that is not workin put it in and push backward toward the tailgate
A 2000 Ford Ranger tailgate is typically interchangeable with tailgates from 1998 to 2005 models of the Ford Ranger. Additionally, the 1997 model may also fit, but it's essential to verify compatibility based on specific features and styles. Always check for any differences in design and mounting points before making a swap.
You unscrew the bracket holding the cable with a T45 size torque wrench and replace it with the correct size cable. When I replaced mine the washer stuck to the bolt so I had to pry that off as well.
a 92 Ford Ranger stuck in 4th gear can be caused by several things. Low fluid, stopped filter, broken vacuum line or a stuck transmission valve can all be the cause.
Simply undo the tailgate cables, pull the right hand side away from the truck (GENTLY) and then the left side slides off its bushing. saw4
To open a broken tailgate on a Ford Ranger, first check for any visible damage or obstructions that may be preventing it from opening. If the latch mechanism is jammed, you can try using a flathead screwdriver to gently pry it open. If that doesn't work, accessing the tailgate from inside the truck bed or removing the tailgate panel may be necessary to manually release the latch. Always consult your vehicle’s manual for specific instructions related to your model.
1989 Bronco11 back hatch door won,t open
no it almost 2 inches wider
Remove your front axles.