all hinge pins need to be cut out with a tortch or hammer off the top of the bushing with a hammer and screw driver
To replace the driver's door hinge pins on a 2003 Chevy Express van, first, support the door to prevent it from falling. Remove the hinge cover and then use a hammer and punch to drive out the old hinge pins. Once the pins are removed, insert the new hinge pins and secure them in place. Finally, test the door's movement and reattach any removed components.
To replace the rear door hinge pins on a 2001 Chevy Express cargo van, start by supporting the door with a jack or a sturdy object to prevent it from falling. Remove the hinge cover if present, then use a hammer and punch to drive out the old hinge pins from the top and bottom hinges. Insert the new hinge pins, ensuring they are seated properly, and reattach any covers. Finally, test the door movement to ensure it opens and closes smoothly.
they have to be beat out with a punch,they are usually very rusty,penetrating fluid helps,or you can heat them with a torch.
Not removable- replace entire hinge assembly
Simply use a punch and a hammer to pop them out. Have a second person stabilize the door or use a floor jack as support
To remove the dashboard on an Escort Diesel van, remove the steering column cover. Next locate all of the bolts holding the dashboard on and remove them carefully.
drive from london to scotland that should do it
There are none. The cam needs to be set with a plate and use pins to set the crank and fuel pump pulley.
To remove the rear half doors (barn doors) on 94 and up astro van, you must remove the hinge "pins". They can be a bear to get out.Doors that are still on the vehicle can best be removed by using an air chisel between the head of the pin and hinge.If they are off,such as used doors you can also use an air chisel with a punch and drive the pin from the bottom upwards.If they are stubbon you may have to use heat.The hinges are welded to the door frame and body so the only serviceable parts are the pins and bushings.
I had one person heat the hinge with a welding torch until it was cherry red, and then I used an air chisel to inch it out. We did this back and forth getting about an 1/8 of an inch each time. Replace with a new hinge and use the pins with a grease fitting.
what is the coolant capacity of a ford escort van 1,8
you need to figure out what kind of vehicle you have. is it an escort or a econoline van? ford never made a escort van, at least not for the us market.