0
To reset the GM Oil Life System after an oil change:
1. Turn the ignition to ON, with the engine off.
2. Fully press and release the accelerator pedal three times within five seconds.
3. If the CHANGE ENGINE OIL light message flashes, the system is reset. However, if it stays on, it did not reset. You'll need to refer to the vehicle's owners
manual or your local GM dealership.
What else can I help you with?
How do you reset the check engine light on a 2003 GMC Savana?
It is important to make sure the check engine light is not on when having a car inspected. A person can reset the check engine light by clearing the codes that are causing the light to go on.
How do you reset or turn off the check engine light on a 1997 GMC Jimmy?
just remove the battery cable for about 5min then put it back. that should reset the check engine light.
How do you reset06 GMC Sierra Check Engine Light?
You need to rent / purchase an OBD II code reader to check & reset the check engine light.
How do you reset maintenance light on a 2005 gmc c6500?
How do i reset a service engine light on a 2005 gmc c6500 cat engine
How do you Reset check engine light gmc sierra 2003?
Have vehicle scanned to have stored codes erased
How do you reset the check engine light on 1996 gmc truck?
To reset the check engine light on a 1996 GMC truck, you can disconnect the battery by removing the negative terminal for about 15 minutes. This will clear the vehicle's computer memory and reset the light. Alternatively, you can use an OBD-II scanner to erase the trouble codes, which will also turn off the check engine light. However, it's important to address the underlying issue that triggered the light to ensure it doesn't come back on.
How do you reset the check engine light on a 1996 GMC Jimmy?
unhook the battery for abt. 30 sec and re connect
How do you reset check engine light on a 2009 GMC Yukon.?
To reset the check engine light on a 2009 GMC Yukon, you can use an OBD-II scanner to clear the trouble codes after fixing the underlying issue. Alternatively, you can disconnect the negative battery cable for about 15 minutes, which will reset the vehicle's computer and turn off the light. However, it's important to address the root cause of the check engine light before resetting it to avoid further issues. Always consult a professional if you're unsure about the cause.
How do you reset the check engine light on a 2015 GMC Sierra truck?
To reset the check engine light on a 2015 GMC Sierra, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Alternatively, you can disconnect the battery for about 15 minutes, then reconnect it, which will reset the vehicle's computer. However, it's important to address the underlying issue that caused the light to activate before resetting it. If the light reappears, further diagnostics may be necessary.
How do you reset the service engine soon light on a 2004 gmc envoy?
To reset the service engine soon light on a 2004 GMC Envoy you can remove the ECU fuse. ECU stands for electronic control unit.
How do you reset check engine light 2007 gmc 4.8L?
To reset the check engine light on a 2007 GMC 4.8L, you can use an OBD-II scanner to clear the trouble codes. Simply connect the scanner to the vehicle's diagnostic port, turn the ignition to the "On" position without starting the engine, and follow the scanner's instructions to erase the codes. Alternatively, you can disconnect the negative battery terminal for about 15 minutes, which will also reset the light. However, be aware that this method will reset all electronic settings in the vehicle.
How do you reset the oil light on GMC Denali 2005?
To reset the oil light on a 2005 GMC Denali, first turn the ignition to the "ON" position without starting the engine. Then, press the accelerator pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to ensure the oil light is reset. If the light remains on, you may need to check the oil level or consult a mechanic.
