2 inches
A standard handicapped-accessible door should have a minimum clear width of 32 inches when opened at a 90-degree angle. The door itself typically needs to be at least 36 inches wide to accommodate this requirement. Additionally, the door must have a maximum threshold height of ½ inch for easy access. Compliance with the Americans with Disabilities Act (ADA) guidelines is essential for ensuring accessibility.
they should be 5 inches
A 1997 Mitsubishi Montero Sport should have front door speakers that measure 6 3/4 inches. The rear door speakers should measure 6 3/4 inches. The dash speakers should measure 4 inches.
unscrew the plate at the bottom and slide lower end along the floor until the pin at the top can be clear of the indent at the top of the door. Now the door should be clear and unattached!
The size of the hole drilled for a door knob should typically be 2 1/8 inches in diameter.
You should have three inches of wood on each side of any residential door.
A barn door should be about 2 inches wider and 1 inch taller than the opening when installing it.
For installing a door knob, you should use a hole saw that is 2-1/8 inches in size.
The bifold door knob should be placed at a height of about 36 inches from the floor for optimal functionality and aesthetics.
My first thought was vet, but obviously you should get on wikipedia FIRST and wait a few days. Hopefully it will clear up on its own.
To measure a door, you should use feet and inches, especially in the United States, where door dimensions are commonly expressed in these units. For more precise measurements, such as the thickness of the door or the width of the frame, you can also use inches alone. In other countries, metric units like centimeters or millimeters may be more appropriate.
For the ( 2005 ) Ford Focus : 3 door / 5 door : 168.5 inches 4 door sedan : 175.2 inches Wagon : 178.5 inches