Fuse for rear lights on boxer van
Have to remove the doorliner from the rear door. Remove the 2 screws that hold the black trim that covers the lamps. Then you can remove the clear cover and access the lamp.
how do I remove rear speaker in rear door 94 astro van rear door will not open
To change the rear bulb on a Citroen Relay Van, you will need to enter through the rear cargo area. You will need to remove the nuts that fasten the tail light together. The bulb will then be loose enought to pull out for replacement.
depends which light is on yor dash board
To change the rear number plate light on a Citroen Nemo van, you will first need to locate the light housing on the rear of the vehicle. Then, carefully remove the screws or clips holding the housing in place. Once the housing is removed, you can access the light bulb and replace it with a new one. Finally, reassemble the housing and ensure it is securely in place before testing the new light.
To change the number plate light on a Peugeot Expert van, first, locate the light assembly above the number plate. Use a flat-head screwdriver to gently pry off the cover or housing. Once exposed, remove the old bulb by twisting it out of the socket and replace it with a new bulb, ensuring it fits securely. Finally, reattach the cover and test the light to ensure it's working properly.
You still have to remove the transmission on a van to access the rear freeze plugs.
The Peugeot Expert Van is made by Peugeot. It is a French company. The first version of the van was discontinued in 2001. Other models are still available, however.
There are four small four way screws in the cover. Simply take those screws out and the light cover will come straight off.
If you have the manual, you can see how to do it on page 235 and 236. If not, follow the following directions: To gain access to the stop, tail, and back-up light, first remove pull down strap on the left side of vehicle. Then remove pull down handle on right side of vehicle. Hold door with left hand and pull plastic panel with right hand to separate it from the door to expose the rear lights. Then remove the three bolts that hold the rear light assembly in place. Remove rear light assembly and then you can change the bulb.
Open the liftgait and it is above the right rear tail light. there should be a cap that covers. Remove cap and fill. Evelyn