A flashing amber light on traffic lights typically indicates that drivers should proceed with caution. It signals that they must be aware of their surroundings and yield to any pedestrians or other vehicles in the intersection. In some jurisdictions, it may also mean that the intersection is uncontrolled, and drivers should treat it like a stop sign. Always check local traffic regulations, as meanings can vary by location.
It is not illegal to run through amber traffic lights if they are the flashing amber lights. Amber lights that occur just before red lights are not illegal to run through, but caution should be observed. A sudden burst of speed to get through the light could cause an accident.
A red light - steady or flashing - means STOP. A steady amber light means Caution - signal about to change. A flashing amber light means SLOW DOWN.
You must stop
Amber
Amber
In the United States, the middle light on a traffic light is "Yellow" or "Amber," depending on the regional colloquialism.
No, Flashing your headlight's will have no effect on a traffic signal. The reason a traffic signal changes for emergency vehicles that have the lights flashing, is, they have a special transmitter that tells the light to change. This transmitter is connected to the emergency lights so it comes on when the lights are used.
Flashing amber light means slow down, watch for potential dangers. Flashing red means stop; proceed if and when it is safe.
stop at the stop line
In the mini cooper, the amber flashing exclamation mark comes on when the tires are low on pressure and the traction changes. Keep on checking the tire pressure to control that.
Flashing red lights may be permanent or temporary (e.g. when the programmed sequence fails).A flashing red light means STOP, then proceed when safe.If it is a 4-way flashing red, cross traffic will also stop, and the intersection becomes identical to one with stop signs. This is a safety feature in some programmed signals. If only one direction has the flashing red (such as a road that intersects a busy highway), the traffic entering the highway must stop, and never has the right-of-way.* Some international traffic signals use a flashing red in place of steady red, to attract the attention of drivers where there is a profusion of commercial lights.
If there are pedestrians still crossing when the amber light is flashing, the motorist must remain stationary. If there are no pedestrians crossing, the motorist can proceed. (But, be careful of pedestrians taking a chance and attempting to cross when the amber light is flashing - it is best to use caution until the light turns green.)