0
What else can I help you with?
What is the allowable live load for three-storey commercial buildings?
1
What is allowable structural capacity of pile in pile load test?
allowable structural capacity
When is it allowable to move your forklift with its load fully raised?
to assist when turning
What is a typical ratio of live load to dead load?
A typical ratio of live load to dead load is often around 2:1, meaning the live load (temporary loads like people and furniture) is approximately twice the dead load (permanent loads such as the weight of the structure itself). However, this ratio can vary significantly depending on the type of structure, its intended use, and local building codes. In some cases, especially in residential buildings, the ratio may be lower, while in commercial or industrial settings, it might be higher. Engineers typically analyze specific conditions to determine the appropriate loads for each project.
What is maximum safe femur load in a car crash?
The maximum safe femur load, according to SAE is the allowable injury assessment value. The maximum femur load is 2250 lbs.
What are some of the differences between residential and commercial load calculations?
what difference between residential and commercial load calculations
What is the difference between live load and roof live load?
Live load Both are the same Live load is all the live loads which can be consider as variable load. Roof live load This is limited to few categories. man who climbed on to the roof can be consider as roof live load.
What is a live load?
Live load is a load on the object other than the load from itself.
Is imposed load same as live load?
Imposed loads - or live loads, movable loads that act on the structure when it is in use Imposed load = Live load ;)
What is the maximum allowable span for a double 2x10 beam in a structural application?
The maximum allowable span for a double 2x10 beam in a structural application is typically around 12-15 feet, depending on the specific load and building codes.
What the reason if dead load same with live load?
Because a live load can be self-ambulatory. A dead load will always require transport.
What three factors affect the aircraft allowable cargo load for any given situation?
Humidity, Altitude above sea level, and Temperature
