5 galons
jesus
che tipo di fluido idraulico in bobcat 753 skid steer
The Bobcat 753 has a 14 quart hydraulic reservoir capacity, and the overall system holds 6 gallons.
through the filter
67
The Bobcat 753 is compatible with various backhoe attachments, particularly those designed for Bobcat's line of compact equipment. A commonly used backhoe attachment for the Bobcat 753 is the Bobcat BH70, which is specifically designed for this model to enhance its digging capabilities. Always ensure that the attachment's specifications match the hydraulic and operational requirements of your Bobcat 753 for optimal performance.
http://www.bobcat.com/historical_specs/skid_steer/753_1990 Auxillary Hyd. Flow is 11 gpm.
No, the oil capacity is not the same for the Bobcat 753 and 751 models. The Bobcat 753 typically has an oil capacity of around 2.5 gallons, while the Bobcat 751 has a slightly lower capacity, usually around 2.3 gallons. It's important to consult the specific owner's manual for each model to confirm the exact capacities and ensure proper maintenance.
It is located beside the fill hole on the exterior of the machine
7.5 QUARTS OR 7,1 LITER 753 BOBCAT DIESEL from bobcat service manual
To change the hydraulic oil in a Bobcat 753, first, park the machine on a level surface and shut off the engine. Remove the hydraulic oil filler cap and drain plug to allow the old oil to fully drain out, then replace the drain plug. Fill the hydraulic system with new oil through the filler cap, ensuring you use the recommended type and amount specified in the owner's manual. Finally, check the oil level with the dipstick and run the machine briefly to circulate the new oil, re-checking the level afterward.
This is the most practical Service Repair Manual for the Bobcat 753 Skid Steer Loader Service Repair Manual Download ever compiled by ...Downlaod Link:http://www.repair-guidebook.com/bobcat-753-skid-steer-loader-service-repair-manual-download/