system failure
2096 intk 4300
Turn key on, turn cruise on, then off, then on again. Hit resume button 5 times, holding it down the 5th time. Light should reset. If not, a dealer will have to do it.
32 onces
As it is such a large item (International 4300 is a truck) they can be hard to come by. The best place to look is your local truck dealership or perhaps an online automotive dealer.
The quickest way to reset a change oil light on a Durastar 4300 is to change the oil and replace the oil filter. If this is done and the light is still on, disconnect the battery for about 10 minutes and then reconnect it.
29 quarts
The coolant capacity for a 2003 International 4300 equipped with a DT466 engine is approximately 16 to 18 quarts (around 15 to 17 liters), depending on the specific configuration and cooling system. Always refer to the owner's manual or manufacturer's specifications for the most accurate information.
Just got the answer from Adams. Its 1.8 lbs.
Low coolant
set-back axle
The oil capacity for International 4300 dt466 from 1994 to current hold 30 quarts with filter. Those made before 1994 have smaller engines with the capacity to hold less oil.