This is probably related to your Traction control but instead they have give it a posh name - Vehicle Stability Control.
This is there just to let you know that if its raining or slippy on the roads that it will not stop you from wheel spinning or even losing control on sharp corners.
Thats what Vehicle Stability Control was designed to do (Help Control your vehicle with a lot of help by you too).
How does vsc light turn off on 2005 highlander?
It means your traction control system is turned off for some reason. Most cars with traction control have a switch to turn it off or on.
How To Fix vsc,trac off and engine light on for 2009 Toyota Sienna
If you are talking about the "VSC Off" light, it means that the button to disengage your cars Vehicle Stability/Skid Control" system is engaged. Press the VSC button, the system should reengage, and the light should turn off. If you are talking about the other VSC light, it means that your car has been forced to take evasive action to avoid a dangerous situation. For example, if you are driving on an icy road, and take a turn too tight, the vehicle may be forced to apply pressure to one of the brakes to prevent the car from loosing control. In this situation the VSC indicator light will light up to alert you that the action was taken, and remind you to possibly slow down.
It means there is no output from your ECM (Engine Control Module). You need a new one.
In the Toyota 4Runner, the VSC (Vehicle Stability Control) off button is typically located on the dashboard, to the left of the steering wheel, near the headlight controls. It is usually labeled as "VSC" or "VSC Off." Pressing this button deactivates the stability control system, allowing for more wheel slip, which can be useful in off-road situations. Always refer to your owner's manual for the exact location and usage instructions.
On a 2008 Toyota Highlander, the VSC (Vehicle Stability Control) switch is typically located on the dashboard, near the driver's side, often to the left of the steering wheel or on the lower left side of the instrument panel. It may be labeled with "VSC" or "VSC Off." Pressing this switch can turn the VSC system on or off, which is useful in certain driving conditions. Always refer to the owner's manual for precise location and instructions.
Can be an indication that the system is mal-functioning. Get the vehicle to the dealer or a shop capble of fully diagnosing the problem.
It means you need to have a code reader connected and pull codes to determine the issue.
Vehicle Stability Control "off" light indicating that it is turned off.
VSC means Vehicle Stability Control or Vehicle Skid Control, I don't remember. It controls the car sliding sideways etc as opposed to Traction Control which just controls wheel spin. If it says Check VSC this is a pretty big deal. It means your VSC system is not functioning properly. You are driving without that electronic protection that keeps you on the road. For the most part you are going to be safe w/o VSC but if you hurry, I don't know when you bought your car, but you can get it into the shop before the warranty runs out.
The warning light your talking about (VSC) stand for vehical stability control. When this light is off it means the vehical can no longer assist with keeping the car on the road if you lose control. There could be two reasons it is saying its off. 1st reason- there should be a control button on the dash of the vehical with VSC on it, the button should be in between the drivers side door and steering wheel, just push the button in and it should take the warning off the dash for you. 2nd reason- the actual VSC unit located in the engine bay of your car could be faulty, if the first reason does not fix the problem I would recommend taking the car to Toyota or a really good auto electrician.