0
What else can I help you with?
What type of engine oil for 773 bobcat?
15w40 rotella
Oil capacity for a bobcat 773?
the oil capacity for a bobcat 773 with oil filter is 7.5 quarts
Is there suppose to be oil in the chain drive box on 1999 773 Bobcat?
Yes
Engine Oil weight for a 753 bobcat skid steer loader?
Bobcat recommends 10W-30 and 15W-40 engine oil that meets API specifications. For the Oil Filter Wix Number: 51068 Hope This Helps.
Does a 751 bobcat with a Peugeot engine have an oil cooler?
No, I change last week an Engine (Peugeot XUD9) at a Bobcat.
How much hydraulic oil for 773 Bobcat?
Hydraulic Reservoir 4.8 gal Hydraulic System 8.5 gal Chaincase Reservoir 9 gal
Where is the hydraulic plug on a a bobcat 773?
On a Bobcat 773, the hydraulic plug is typically located on the hydraulic reservoir or in the hydraulic system near the rear of the machine. It may be labeled, and you can usually find it on the left side of the machine, close to the hydraulic oil fill neck. Always refer to the owner's manual for specific locations and maintenance instructions.
What weight Hydraulic oil for 773 bobcat skid steer?
The best thing to use is the Bobcat "orange" Hydraulic fluid. Actually you dont use hydraulic fluid in a skid loader you need to use hydrostatic transmission fluid. Drive relief pressures are in excess of 5000 psi, the fluid needs to drive the machine as well as make the lift arm raise up and down. If you cant get the Bobcat stuff than use 10w30 or better MOTOR OIL. Dumping ISO 46 or AW32 can be a very costly mistake.
What is the Oil capacity for a bobcat 873?
Bobcat 873g with Deutz Model BF4M1011F Turbo Charged engine (73hp):CapacitiesEngine Oil with filter 16qtsFuel 25 galsHydraulic Reservoir 22qtsHydraulic System 13galsChaincase Reservoir 10galsInformation taken right out of Bobcat Service Manual for 873 G series
What weight oil for 6.5 Briggs and stratton engine?
what weight oil for 6.5 engine
What is the engine oil capacity of a bobcat t590?
The engine oil capacity of a Bobcat T590 is approximately 2.5 gallons (9.5 liters). This includes the oil filter, so it's important to account for that when performing maintenance. Always refer to the owner's manual for specific details and recommendations regarding oil type and maintenance intervals.
How much oil quarts does a 753 bobcat take?
The Bobcat 753 typically requires around 5.5 quarts of engine oil. It's important to check the owner's manual for the specific model and any updates, as oil capacity can vary based on engine type and configuration. Always use the recommended oil type for optimal performance.
