0
What else can I help you with?
What are LED warning lights used for?
When thinking about uses for LED warning lights and their uses many people may not be aware the the Police use LED warning lights. Every day vehicles use LED warning lights.
The air condition panel lights flashes for about 20 minutes when you start the car you can not use the air condition but you can use the heater also the harzard lights will not work what is wrong?
"http://wiki.answers.com/Q/The_air_condition_panel_lights_flashes_for_about_20_minutes_when_you_start_the_car_you_can_not_use_the_air_condition_but_you_can_use_the_heater_also_the_harzard_lights_will_not_work_what_is_wrong"
How do you reset warning lights on your dash?
To reset warning lights on your dashboard, first, address the underlying issue that triggered the light. Once resolved, turn off the vehicle and disconnect the battery for about 15 minutes, then reconnect it. Alternatively, you can use an OBD-II scanner to clear the codes associated with the warning lights. Finally, start the vehicle to check if the warning lights remain off.
When may you use hazard warning lights when drivings?
Hazard lights may only be used during an emergency where the vehicle requires to be stopped in places it should not normally be stopped, such as a highway. People mistakenly used hazard lights when driving through heavy storms as another form to ensure visibility and is not recommended.
Powakaddy classic warning lights?
The Powakaddy Classic golf trolley features warning lights that indicate various operational issues. A red light typically signals a battery problem, while an amber light may indicate a fault with the motor or an overheating issue. It's important to consult the user manual for specific meanings of the warning lights and recommended actions. Regular maintenance and checks can help prevent warnings from appearing during use.
How do you reset warning lights after replacing clockspring on 05 Renault megane?
To reset the warning lights after replacing the clockspring on a 2005 Renault Megane, you can use an OBD-II scanner to clear any error codes related to the airbag or steering system. Alternatively, disconnect the car battery for about 10-15 minutes, then reconnect it, which may also reset the warning lights. If the lights persist, check for any additional issues or ensure that all connections related to the clockspring are secure. Always consult the vehicle's manual for specific instructions.
Warning lights on dashboard of Honda City?
The warning lights on the dashboard of a Honda can mean different things including low oil pressure and overheating. There are Honda City dealers across the country that can use diagnostic tools to determine the cause.
What causes the warning lights to come on when you use the indicators either way on a Peugeot 405 estate on a K reg?
The warning lights on a Peugeot 405 estate may activate when using the indicators due to a faulty flasher relay or a short circuit in the indicator wiring. Additionally, a blown fuse or malfunctioning bulbs can cause the system to send a warning signal. It's also possible that a poor ground connection is leading to electrical feedback, triggering the warning lights. Checking the indicator circuit and related components can help identify the specific issue.
Are led lights allowed on motorcycles in england?
Not yet. Every blister pack carries the warning 'Not For Road Use'.
Why your turn signal lights up both directions?
When both indicators turn on at the same time they are called the hazard warning lights. These lights warn drivers behind of an oncoming hazard they may not otherwise see. People also use them when they have to pull over so that their car remains visible to other drivers.
Why do warning lights come on and then go off when starting the engine?
Warning lights illuminate when starting the engine as part of a self-check diagnostic process conducted by the vehicle's onboard computer. This brief activation ensures that all systems are functioning correctly and that the warning lights are operational. If there are no issues detected, the lights will turn off after a few seconds, indicating that the vehicle is ready for use. However, if a light remains on after this initial check, it signals a potential problem that needs attention.
Are led strobe lights legal in KY?
189.043 Flashing white or amber lights to warn of traffic hazard permitted. Notwithstanding any other provisions against the use of flashing lights, any vehicle may be equipped with lamps which may be used for the purpose of warning the operators of other vehicles of the presence of a vehicular traffic hazard requiring the exercise of unusual care in approaching, overtaking or passing and when so equipped may display such warning in addition to any other warning signals required by law. The lamps used to display such warning to the front shall be mounted at the same level and as widely spaced laterally as practicable, and shall display simultaneously flashing white or amber lights, or any shade of color between white and amber. The lamps used to display such warning to the rear shall be mounted at the same level and as widely spaced laterally as practicable, and shall show simultaneously flashing amber or red lights, or any shade of color between amber and red. These warning lights shall be visible from a distance of not less than fifteen hundred (1,500) feet under normal atmospheric conditions at night. History: Created 1966 Ky. Acts ch. 50, sec. 1.
