If your Mercedes Atego 1823 won't go into reverse gear, it could be due to several reasons. Common issues include a faulty gear linkage, low Transmission Fluid, or internal transmission problems. It may also be related to an electrical issue affecting the transmission control module. It's best to have a qualified mechanic diagnose the problem to avoid further damage.
Immediately passed the Park position. Neutral separates the Reverse gear and the Drive gears.
my 1991 Mercedes 420sel have probleme when i sheiffing to reverse gear take long be enquad
To bleed the gear lever on a 2003 Mercedes Atego 2528L, start by ensuring the vehicle is safely parked and the engine is off. Locate the hydraulic reservoir and check the fluid level; top it off if necessary. Then, with someone pressing the clutch pedal, open the bleeder valve on the slave cylinder to release air, allowing fluid to escape until no more air bubbles are present. Finally, close the bleeder valve, check the fluid level again, and ensure everything is securely reassembled before testing the gear lever function.
You have a serious transmission problem. Have it checked ASAP...
Check the fluid level. Reverse is the first gear to go when the level is too low. Otherwise, you may have more serious problems.
You need to lift the collar on the gear stick to engage reverse gear
Reverse gear
reverse
no but you can by a kit on eBay for a reverse gear
Its not in reverse gear.
The reverse gear is the strongest.
The reverse gear linkage would be attached to the transmission, not the transfer case.