PBS Stands for Public Broadcasting System, and each state usually has their own.
Well, the question your asking is basically impossible. It's like asking to convert a gallon of water into cans of pop. It is possible to convert the gallon of water into cans of water not soda. So you can convert dBm to watts, not dBi.
20 dbm
PdBm = 10*log10(1000*W)
The number 7821 in verbal form is "seven thousand eight hundred twenty-one."
To make 1X PBS from 10X PBS, dilute the 10X PBS solution by mixing 1 part of 10X PBS with 9 parts of distilled water. For example, if you need 100 mL of 1X PBS, combine 10 mL of 10X PBS with 90 mL of distilled water. Mix thoroughly to ensure the solution is homogeneous. Store the diluted 1X PBS at room temperature or refrigerated for future use.
Only use 1X PBS. 10X PBS is made up because it is easier to store and can be diluted when needed. Labs that use PBS often use it in large quantities so making up 10 or 20 liters at a time is usual and making it up as a concentrate is easier to do.
The stocks are commonly labeled as X factors such as 10X, 5X, 100X etc. X-factor indicates that the solution is concentrated and must be diluted usually with water to 1X concentration for use. For eg: - A 100X concentrated solution should be diluted to 100 fold. to convert 1X to 10X take one ml of 1x buffer in a measuring cylinder and dilute it to make it 10 ml. its now 10x buffer.
1X PBS might mean 1 in 10 solution 1/10
10x - 1x = 9
10X PBS (0.1M PBS, pH 7.4): NaCl --------------------------------------------- 80 g KCl----------------------------------------------- 2g Na2HPO4 (anhydrous) ----------------------- 14.4 g KH2PO4 (anhydrous) ------------------------- 2.4g Distilled water ------------------------------- 1000 ml Mix to dissolve and adjust pH to 7.4 Store this solution at room temperature. Dilute 1:10 with distilled water before use and adjust pH if necessary.
It is just Phosphate buffered saline.
9x + 1x = 10x.
1x PBS buffer typically has a molarity of around 0.01 M. To prepare a 20 mM PBS buffer, you would need to dilute the 1x PBS stock solution with water. For example, to make 1 liter of 20 mM PBS buffer, you would need to mix 2 ml of 1 M PBS stock solution with 98 ml of water.
incomplete formula.1x of 20 equals 2 = .10x is 0.1x?=2 ?=20
To convert 3x to 1x, you can simply divide 3x by 3. This will give you 1x.
x+0.1x=110 10x+1x=1100 11x=1100 x=100