0
The maximum throughput of pure ALOHA is approximately 18.4%. This means that, under ideal conditions, only about 18.4% of the time slots can be successfully used for transmission without collisions. This low efficiency is largely due to the random nature of packet transmissions, which increases the likelihood of collisions. In contrast, slotted ALOHA improves this to about 36.8% by organizing time into discrete slots.
What else can I help you with?
What is asymmetrical communication?
In asymmetrical communication, downstream throughput is higher than upstream throughput.
What is different between throughput and transmission rate?
As far as I concern, both of them are the same. Throughput rate: is the amount of data per second that can be transferred. Transmission rate: is also the amount of data that could be transmitted onto the communication link per second.
The amount of data that can be transmitted within a fixed time period is?
The amount of data that can be transmitted within a fixed time period is referred to as bandwidth. It is typically measured in bits per second (bps) and indicates the maximum rate at which data can be transferred over a network connection. Higher bandwidth allows for faster data transmission, enabling activities such as streaming, downloading, and online gaming to occur more smoothly. The actual data throughput may be affected by various factors, including network congestion and latency.
What is the maximum length of a 10BaseT?
100 meters.
What is the maximum segment length supported by the 10GBaseER standard?
40 km
What is media access control sublayer?
otocols used to determine who goes next on a multiaccess channel belong to a sublayer of the data link layer called MAC.Throughput and channel utilization in PURE ALOHA is 18%Throughput and channel utilization in SLOTTED ALOHA is 37% which is double of Pure Aloha
Difference between pure aloha slotted aloha in networking?
1) Pure Aloha is a Continuous time system whereas Slotted Aloha is discrete time system.2) Pure ALOHA doesn't check whether the channel is busy before transmission.Slotted ALOHA send the data at the beginning of timeslot.3) Pure aloha not divided in to time .Slotted aloha divided in to time
Difference between pure aloha and slotted aloha?
1) Pure Aloha is a Continuous time system whereas Slotted Aloha is discrete time system. 2) Pure ALOHA doesn't check whether the channel is busy before transmission. Slotted ALOHA send the data at the beginning of timeslot. 3) Pure aloha not divided in to time .Slotted aloha divided in to time 4) In slotted ALOHA, a frame can be sent only at fixed times, whereas in pure ALOHA, you can send any time.
What are the difference between pure aloha slotted aloha?
They differ with respect to whether time is divided into discrete slots into which all frames must fit. Pure ALOHA does not require global time synchronization; slotted ALOHA does.
What is the theoretical maximum throughput for 802.11b?
11 Mbps
1000Base-SX has a maximum throughput of?
1 Gbps
Consider the delay of pure aloha versus slotted aloha at low load which one is less?
At low loads, slotted ALOHA generally experiences less delay compared to pure ALOHA. This is because in slotted ALOHA, the time is divided into fixed slots, reducing the chances of collisions and improving the efficiency of the system. In contrast, pure ALOHA does not have a fixed time slot, leading to a higher probability of collisions and greater delays.
What is the main difference between slotted aloha and pure aloha?
q pakata hai be/
What is the maximum throughput of the pci bus?
132 Mb/sec
What line has a maximum throughput of 1.544 mbps?
T1 line
What is the maximum throughput of a T3 line?
45 Mb/s
What is the maximum throughput of a T-1 line?
1.5 Mbps www.intelletrace.com
