0
What else can I help you with?
Which bus types supports 480 mbps data rates?
USB 2.0
What is the transmission rate of Ethernet lans?
Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can continuously transmit at the rate X Mbps if that user is the only person sending data. If there are more than one active user, then each user cannot continuously transmit at X Mbps.
Which is better higher Mbps or lower Mbps?
It is desirable to have a higher Mbps in almost all cases. Mbps = Mega bits per second. It describes the throughput (or bandwidth) or data through a network interface.
Data transfer rate of DVD?
around 200 mbps
How do you convert MHz into mbps?
You can't ! MHz or Megahertz is a measurement of frequency - mbps or mega-bits per second is a measurement of data transfer speed.
What ports transfers data at rates up to 1000 mbps?
Ethernet ports transfer data at rates up to 1000 mbps.
Which bus types supports 480 mbps data rates?
USB 2.0
What interface has data transfer rates up to 640 MBps?
Small Computer System Interface (SCSI)
What is the transmission rate of Ethernet lans?
Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can continuously transmit at the rate X Mbps if that user is the only person sending data. If there are more than one active user, then each user cannot continuously transmit at X Mbps.
What are the network speeds for 3g mobile phones?
Radio Service offers speeds up to 114 Kbps. Enhanced Data Rates up to 384 Kbps. downlink speeds up to 1.92 Mbps. Terrestrial Radio Access is 100 Mbps.
Which type of cable standard uses a 9-pin connector and supports data rates in excess of 800 Mbps?
Original answer:firewire IEEE 1394bImproved answer:IEEE 1394b
What is 10100 Ethernet?
An Ethernet device that is capable of 10/100 operation is capable of transferring and receiving data at either 10 Mbps or 100 Mbps. Older devices were only capable of transferring at 10 Mbps. To be backwards-compatible, devices have to be capable of transmitting data at 10 Mbps.
Which is better higher Mbps or lower Mbps?
It is desirable to have a higher Mbps in almost all cases. Mbps = Mega bits per second. It describes the throughput (or bandwidth) or data through a network interface.
How long should it take to transfer a 35 MB file from one computer to another over a Fast Ethernet network that supports data transfer rates of 100 Mbps?
21
Speed of your net access is defined in terms of what?
The speed of internet access is typically defined in terms of data transfer rates, usually measured in bits per second (bps) or a variation of it like kilobits per second (kbps) or megabits per second (Mbps). This measurement quantifies how quickly data can be transmitted between the user's device and the internet.
Data transfer rate of DVD?
around 200 mbps
What is the maxium data rate for the following 802.11b 802.11a 802.11g 802.11n?
802.11a, the maximum data rate is up to 54Mbps 802.11b, the maximum data rate is up to 11Mbps 802.11g, the maximum data rate is up to 54Mbps 802.11n, the maximum data rate is up to 150Mbps
