0
USB 2.0
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
3G sends data at rates of up to how many Mbps when stationary?
2
What is the transmission rate of Ethernet lans?
Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can continuously transmit at the rate X Mbps if that user is the only person sending data. If there are more than one active user, then each user cannot continuously transmit at X Mbps.
Which is better higher Mbps or lower Mbps?
It is desirable to have a higher Mbps in almost all cases. Mbps = Mega bits per second. It describes the throughput (or bandwidth) or data through a network interface.
Data transfer rate of DVD?
around 200 mbps
How do you convert MHz into mbps?
You can't ! MHz or Megahertz is a measurement of frequency - mbps or mega-bits per second is a measurement of data transfer speed.
What ports transfers data at rates up to 1000 mbps?
Ethernet ports transfer data at rates up to 1000 mbps.
The 802.11g standard supports transfer rates of up to 30 Mbps?
False
The fastest data rate an IrDA device supports is 4 Mbps what IrPHY supports this rate as the highest data rate?
FIR
Which type of cable standard uses a 9-pin connector and supports data rates in excess of 800 Mbps?
Original answer:firewire IEEE 1394bImproved answer:IEEE 1394b
How long should it take to transfer a 35 MB file from one computer to another over a Fast Ethernet network that supports data transfer rates of 100 Mbps?
21
3G sends data at rates of up to how many Mbps when stationary?
2
What interface has data transfer rates up to 640 MBps?
Small Computer System Interface (SCSI)
What do you mean by 63E1 in STM4?
The Data rate of one E1 is 2048 bps which have 32 voice channels.And STM is a multiplexing of E1's in SONET we say STM-4 is equal to OC-12 both have same data rates i.e. 622.08 Mbps it support 269 E1's. STM-1 or OC-3 supports 67 E1's data rate (155.52 Mbps).
What transmission speed does 100-Mbps or Fast Ethernet support?
Ethernet supports speeds as low as 10 Mbps and as high as 1 Gbps. There are new initiatives to support 10 Gbps in the near future.
What is half duplex 10 100 switch?
Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).
What is the transmission rate of Ethernet lans?
Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can continuously transmit at the rate X Mbps if that user is the only person sending data. If there are more than one active user, then each user cannot continuously transmit at X Mbps.
What are the network speeds for 3g mobile phones?
Radio Service offers speeds up to 114 Kbps. Enhanced Data Rates up to 384 Kbps. downlink speeds up to 1.92 Mbps. Terrestrial Radio Access is 100 Mbps.
