0
What else can I help you with?
What are ethernet cables?
Ethernet Cables are cables with 4 or eight conductors that connect to an RJ45 connector on both ends. They come in a variety of colors and must be no longer than 100 Meters. 10BaseT and 100BaseT use pins 1,2,3 & 6 GigE uses all 8 wires. Generally all current Ethernet cables come with all 8 wires now.
Which cable is the Ethernet cable?
Several types of cables are used, depending on the specific type of Ethernet. The cables most commonly used nowadays, however, are UTP (unshielded twisted pair) - and for longer distances, fiber optic.
What types of cables are used with RJ11 connectors?
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
How can you get two separate ethernet plug-ins to 1 router if you only jave 2 ethernet plug-in?
If you don't have enough ethernet sockets in a router, you can plug a switch or a hub into the socket. The hub or switch will supply support for additional ethernet cables.
Can a Ethernet tranceiver be used to adapt a phone the the internet?
No. An ethernet transceiver is for connecting only to ethernet cable - 8 wires. Phone wire has 4 or 6 - not enough (plus plug is too small.) You need a modem to connect to a service provider over phone lines.
Ethernet Cable?
form_title=Ethernet Cable form_header=Connect to the internet with an ethernet cable. How many ethernet cables would you need?= {(),1,2,3,4,5,6,7,8,9,10} How long do the cables need to be?=_ Where do you need the ethernet cables?=_
Is 15m too long for an cat5e Ethernet cable will it affect performance?
No, the standard Ethernet cables can have up to 100 meters.No, the standard Ethernet cables can have up to 100 meters.No, the standard Ethernet cables can have up to 100 meters.No, the standard Ethernet cables can have up to 100 meters.
How do you keep your dsl internet connection on?
Keep the ethernet and the phone line cables plugged into the sockets they are supposed to be in
Is there such thing as an Internet cord connector?
No there is not. But the cable used to connect to internet access devices would be ethernet cables or phone cables for dial up connections
What are the device to connect the same four PC's to a cable modem?
Ethernet cables. What do you mean by "same 4 PCs"? if you mean connection them into the same port, you would need a splitter, if you mean connecting them into 4 individual ports, then use 4 individual Ethernet cables.
How do you make a Ethernet cable longer?
To make an Ethernet cable longer, you can use an Ethernet coupler, which connects two standard Ethernet cables together. Ensure both cables are of the same type (e.g., Cat5e, Cat6) for optimal performance. Alternatively, you can also use a network switch or a powered Ethernet extender to increase the distance the signal can travel without loss. Always check the maximum distance limitations for Ethernet cables to maintain quality connectivity.
What are the differences between Ethernet and phone jack connections?
Ethernet connections are used for high-speed internet access and data transfer, while phone jack connections are typically used for landline telephone communication. Ethernet cables have more pins and can support faster data speeds compared to phone jacks.
Does Walmart carry cheap Ethernet cables?
Walmart does carry cheap ethernet cables at their online store only. They sell the cheapest ethernet cables for around 8 dollars, and the expensive ones for around 30.
What is differene between fast ehternet and gigabit Ethernet?
Fast Ethernet runs at 100Mbit and requires CAT5e cables. Gigabit Ethernet is 1,000Mbit and requires CAT6 cables
What is an ethernet switch expansion slot?
expands the amount of Ethernet cables you can have.
Any of our 50ft Cat5e Ethernet Patch cables will work great.?
Any of our 50ft Cat5e Ethernet Patch cables will work great.
What are the best practices for securing Ethernet cables with Ethernet cable clips?
The best practices for securing Ethernet cables with Ethernet cable clips include ensuring the clips are the right size for the cable, using clips that are designed for Ethernet cables, placing the clips at regular intervals along the cable, and avoiding bending or crimping the cable excessively.
