GTX 1060 is graphics card and DDR 3 is RAM texture, If mother board support both these then one can use both in same PC.
Virtual memory, the answer is virtual memory.
Optical memory is an early form of computer memory. It involves the use of an optical system for the writing and reading of data to and from a computer's main memory.
A memory address is a specific location in a computer's memory where data is stored. Memory addressability refers to the maximum amount of memory that a computer system can access and use. In other words, memory addressability is the range of memory addresses that a computer can access, while a memory address is a specific location within that range.
Memory slot is a place where a memory can introduced to a system. It is an interface to add a memory device. This can be various types. For introduce primary memory we use tha RAM slot. Or for secondary memory interfacing we use different types of interfacing, such as PATA, SATA etc. But for RAM interfacing we require to match FSB (BUS Speed) of the memory device, such as FSB 400 or 667 or 800 etc. External chache is noting but a chache memory that is attached to a computer system to optimise its performance. It is used to boost up the performance of a conventional computers.
That would be DDR-3 memory. Some multi-core systems use DDR-2 memory. Then of course there is cache memory, but that is a variation of SRAM, and it has been used ever since the 386 or 486 machines. Nowadays, cache memory is not in discrete chips, but a part of the processor. Placing the cache memory and memory controller on the CPU die greatly improves the throughput.
3GB is the size of the memory. DDR3 stands for "double data rate type 3" which is a high bandwidth type of memory. This is a pretty standard size for memory for those who use a computer for everyday tasks but not for high resolution images or gaming.
Currently all computers in the market that are for gaming use DDR3. 16GB DDR3 is enough to run very powerful programs and large gaming use. Hope this helps
9800 GTX+ is better than the 8800GT, they have different cores. The 9800GTX + is also manufactured on a 55nm die.The GeForce 8800 GT features a clock speed of 600 MHz and a GDDR3 memory speed of 900 MHz. It also makes use of a 256-bit memory bus, and uses a 65 nm design. It is comprised of 112 SPUs, 56 TAUs, and 16 ROPs.Compare those specs to the GeForce 9800 GTX+, which comes with GPU core speed of 738 MHz, and 512 MB of GDDR3 memory running at 1100 MHz through a 256-bit bus. It also features 128 Stream Processors, 64 Texture Address Units, and 16 Raster Operation Units.In theory, the GeForce 9800 GTX+ should be 18% faster than the GeForce 8800 GT 512MB overall.
They are RAM (memory) chips for use in a computer.
Yes!
sorry bout this, but the md2614u only supports ddr2 memory, and the limit on RAM is 4gb.
DDR3 memory provides a reduction in power consumption of 30% compared to DDR2_SDRAMmodules due to DDR3's 1.5 V supply voltage, compared to DDR2's 1.8 V or DDR's 2.5 V.
The ATX form factor is an ancient one. Modules can range all the way from 72-pin DIMMS to DDR3.
DDR3 is better at the moment, however to make full use of DDR3 RAM you need a DDR3-compatible motherboard as well as a multi-core processor.
Computer uses Memory installed on DIMM Slots on Motherboards.Nowadays different versions of DDR RAMs are used (DDR1, DDR2 & DDR3).Laptops use similar memories (DDR1, DDR2 & DDR3) but in small form of DIMM Sockets called Small Outline Dual Inline Memory Modules (SO-DIMM) memories.
Unfortunately, no. DDR RAM will not work in a DDR2 motherboard, and DDR2 RAM will not work on a DDR3 motherboard. There are a few motherboards that have slots for both DDR and DDR2, so it is conceivable that there could be motherboards with slots for both DDR2 and DDR3.
DDR3 uses 1.5V; DDR2 uses either 1.8V or 2.5V