0
packet switching
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Write difference in the form of a table between Ping and Trace Route command?
The Ping command sends a small packet of data to a destination IP address and waits for a response. It measures the time it takes for a packet to travel from the source to the destination. This command is typically used to check if a network device is online and responding to requests. On the other hand, the Trace Route command sends a series of packets to a destination IP address and tracks the route that each packet takes. It identifies each router or hop that a packet goes through on its way to the destination. This command can be used to diagnose network latency issues or identify where data is being lost. While the Ping command only provides information on the time it takes for a packet to reach the destination, the Trace Route command provides more detailed information on the network path and any delays or losses that occur along the way. In summary, both the Ping and Trace Route commands can be useful in troubleshooting network issues, but they serve different purposes. The Ping command is a simple tool for testing connectivity to a destination device, while the Trace Route command provides more detailed information on the network path and any issues that may be occurring.
What are the features of hub?
at the physical layer ,hub can support little in the way of sophisticated networking. hubs do not read any data passing through them and are not aware of there source and destination.
What is acknowledged connection-oriented service?
Acknowledged connection-oriented service-the source and destination machines establish a connection before any data are transferred.Each frame sent is numbered and the data link layer guarantees that each frame sent is received. by Dardanello
What is the difference between routing and forwarding?
routing refers to deciding the route of the packet from one system (a computer) to another system (a computer). It involves many intermediate routers and routing table knowledge.forwarding is a rather simple process of passing a packet from one port/interface to another port /interface. It generally involves one of the routers and routers forwarding table informationThat's what they called call forwarding service in telecommunication.
What would you call a device that works with binary data?
Digital Data is data that is stored in binary, and a Digital Device is any device that works with binary data
Can you use traceroute from windows computer to trace a unix computer?
traceroute traces the path data packets have to follow to reach a destination and back. As such, when you run it on any IP address that can be pinged, regardless of what the target is running, it will run.
Why is it important to look at your work area and plan the path you will travel?
It is important to look at your work area and plan the path that you will travel to plan for any eventualities.
Why do you need uplink and downlink?
A:Uplink translates also to Upload - where you send data to another destination. Like when you want your data to be acessed by any other person you upload that thing and data rate of uploading is called as uploading speed.Downlink translates to Download - where you receive data from another destination. meant that when you want to acess any data from any source and data transfer rate from downlink is also known as downloading speed.
Why it is called uplink and downlink?
Uplink translates also to Upload - where you send data to another destination. Like when you want your data to be acessed by any other person you upload that thing and data rate of uploading is called as uploading speed. Downlink translates to Download - where you receive data from another destination. meant that when you want to acess any data from any source and data transfer rate from downlink is also known as downloading speed
What is a circuit?
In electronics , a circuit is a complate circular path that electricity flows through.A simple circuit consists of a current source .conductor and a load . The term circuit can be used in a general sence to refer to any fixed path that electrocity,data or a signal can travel through.
What is a circuit What can you use it for?
In electronics, a circuit is a complete circular path that electricity flows through. A simple circuit consists of a current source, conductors and a load. The term circuit can be used in a general sense to refer to any fixed path that electricity, data or a signal can travel through.
Why use a car to travel to a destination?
It is quicker for any destination that is less than 8 hours drive than flying, it is more convenient once you get there and I like to drive.
What websites sell travel maps?
You can buy travel maps online for any destination by visiting http://www.languagequest.com/traveler/productTypes/mapsChoose.php?gclid=CLaQjoKk_6kCFdMn2godZzBS0cw
Is Italy in general a safe place to travel to?
Yes Italy is a safe place to travel generally, however as with any country of destination it does have some dangerous areas.
Are there any senior travel groups available?
Yes senior travel groups are available. You can visit http://seniortravel.about.com/od/tourgroups/Senior_Travel_Tour_Groups.htm for destination information.
What is the target destination for data that has been cut or copied using the office clipboard?
The target destination for data in the clipboard can be just about any Windows application you choose. If this does not answer your question, please think about what you would like to know and ask a more specific question.
What do Dallas and travel have in common?
Dallas and travel don't have any specific things in common. However, Dallas is a popular travel destination. They have several tourist spots located there. They also have several vaccine locations that you can get your vaccines for international travel.
