No. Hubs simply repeat all the Ethernet frames on all ports and do not interfere with the source or destination MAC addresses and as such do not need their own MAC address.
On a hub network:The host (PC-A) computer sends the frame out its Network Interface Card (NIC) to Fast-Ethernet 0/1 (F0/1) on the HUB. The HUB then sends that frame out every interface (except incoming interface). If the destination MAC address is aaa.bbb.ccc, and PC-B has MAC address aaa.aaa.bbb, then PC-B's NIC will ignore the frame and nothing else will happen.
Ff:ff:ff:ff:ff:ff
Find the mac address of that computer.
destination mac addresssource mac address CRC - FCS
•What is the physical address (the MAC address) of the NIC (or network adapter) for this connection?
On a hub network:The host (PC-A) computer sends the frame out its Network Interface Card (NIC) to Fast-Ethernet 0/1 (F0/1) on the HUB. The HUB then sends that frame out every interface (except incoming interface). If the destination MAC address is aaa.bbb.ccc, and PC-B has MAC address aaa.aaa.bbb, then PC-B's NIC will ignore the frame and nothing else will happen.
It is used to connect the computers to the hub
MAC address are hard coded on network cards and network devices. A HUB acts as a splitter, so yes. >both Mac addresses are provisioned; Implies your ISP will assign unique IP addresses. The hub then acts as only an electrical connection box. Without Unique IP addresses, you need a router instead of a hub or switch
Each server hub has its own address.
Switches store the MAC addresses in an internal database called MAC Address Table. The entries in that table can be addresses learned by the switch or that can be entered manually by the switch administrator. This table is analogy to a router's routing table, only a switch operates at layer 2 whereas the router operate at Layer 3.
Ff:ff:ff:ff:ff:ff
Any network card has its own MAC address, so it doesn't require an extraordinary effort to have your own MAC address. The MAC address is the serial number of the network card.Any network card has its own MAC address, so it doesn't require an extraordinary effort to have your own MAC address. The MAC address is the serial number of the network card.Any network card has its own MAC address, so it doesn't require an extraordinary effort to have your own MAC address. The MAC address is the serial number of the network card.Any network card has its own MAC address, so it doesn't require an extraordinary effort to have your own MAC address. The MAC address is the serial number of the network card.
The MAC address is the LAN/Ethernet card address there is no specfic Mac address for active directoy. Each server/PC in the world has its own unique mac address.
To spoof the MAC address on a Mac use the ifconfig command in the Terminal.
Computers with a specified MAC address can only send and receive information with the IP address it is bound to. To use MAC address binding, you must associate an IP address on the specified interface with a MAC address.
if the MAC address is not matched, then the packet is discarded and not processed.
MAC address stored in NIC card